Workshop Equipment

Universal lifting table with a load capacity of 1000kg (1T) Aside from lifting electric-car batteries, this product is also perfect for lifting and moving engines, automatic gearboxes, chassis components   Features: Powered by compressed air. Sliding cover, allowing convenient battery installation or removal. High ground clearance makes it compatible with all workshop cranes on the market. Extendable and tiltable top table, by means of a mechanical screw Easy to operate and tilt with self explanatory operations. The table features holes with M10 thread, which can be used to mount all types of supports or accessories, including special hooks, brackets, and protective mats for battery packs. Button operated table lowering Rack safety system, when not being operated, the table locks by means of a mechanical anti-lowering safety wedge.   Opening Table                      (1/3 420mm) Extendable Table                  - Tilting Table                          (±3°) Shifting Table                        - Extendable Handle               - Fork Housing                        - Max Capacity                        1000 KG Time To Go Up                      80 s (no load) / 100 s (full load) Time To Go Down                 60 s (no load) / 20 s (full load) Power Supply                       6/8 bar

Read more less

Universal lifting table with a load capacity of 1500kg (1.5T) Aside from lifting electric-car batteries, this product is also perfect for lifting and moving engines, automatic gearboxes, chassis components   Features: Powered by compressed air. Sliding cover, allowing convenient battery installation or removal. High ground clearance makes it compatible with all workshop cranes on the market. Extendable and tiltable top table, by means of a mechanical screw Easy to operate and tilt with self explanatory operations. The table features holes with M10 thread, which can be used to mount all types of supports or accessories, including special hooks, brackets, and protective mats for battery packs. Button operated table lowering Rack safety system, when not being operated, the table locks by means of a mechanical anti-lowering safety wedge.   Specifications Opening Table                       - Extendable Table                   (200mm) Tilting Table                           (±3°) Shifting Table                        - Extendable Handle               - Fork Housing                        OK Max Capacity                        1500 KG Time To Go Up                      80 s (no load) / 150 s (full load) Time To Go Down                 70 s (no load) / 15 s (full load) Power Supply                       6/8 bar

Read more less

Universal lifting table with a load capacity of 1500kg (1.5T) Aside from lifting electric-car batteries, this product is also perfect for lifting and moving engines, automatic gearboxes, chassis components   Features: Powered by compressed air. Sliding cover, allowing convenient battery installation or removal. High ground clearance makes it compatible with all workshop cranes on the market. Extendable and tiltable top table, by means of a mechanical screw Table top can be moved laterally up to 30mm to allow repositioning under the vehicle. Easy to operate and tilt with self explanatory operations. The table features holes with M10 thread, which can be used to mount all types of supports or accessories, including special hooks, brackets, and protective mats for battery packs. Button operated table lowering Rack safety system, when not being operated, the table locks by means of a mechanical anti-lowering safety wedge.   Specifications Opening Table                      - Extendable Table                  (200mm) Tilting Table                          (±3°) Shifting Table                        (±30mm) Extendable Handle               (225mm) Fork Housing                        OK Max Capacity                        1500 KG Time To Go Up                      80 s (no load) / 150 s (full load) Time To Go Down                 70 s (no load) / 15 s (full load) Power Supply                       6/8 bar  

Read more less

‹150KG CAPACITY Suitable for gearboxes, automatic transmissions and DSGs as well as differential gears etc. The front & rear supports and arms, which can be adjusted in distance and tilt angle, provide a secure grip during application and removal The support is applied to the gearbox which can be tilted forwards/backwards and right/left, always ensuring a secure grip Includes adaptor for hydraulic gearbox lifter piston rod Ø30mm   Specifications: Weight: 12 kg Max. load bearing capacity: 150 kg Length/width: 490 mm/460 mm Assembly: Ø 40 mm Forwards/backwards tilt: ±35° Left/right tilt: ±5°

Read more less

Locking Pliers supplied with 4 sets of interchangeable clamps for tightening the snap ring on the transmission shaft.  There pliers ensure mounting without risk of damage to the rush (clips) of the teeth when inserting the bowl on the transmission shaft.  Includes:  1 x Pliers 2 x Ø23.8mm half shell 2x Ø24.6mm half shell  2x Ø26.9mm half shell 2x Ø28.5mm half shell

Read more less

Required to hold battery pack on the platform, safely.  The components fit perfectly to the different types of batteries, taking into consideration the possible specifications of the manufacturer. Slotted holes in the foot allow easy changing/moving of the platform. The support columns are height-adjustable and have a thread for screwing the rubbers/spacers. Used for platforms with M8 and M10 threaded holes.  Specifications: Support foot length: 200 mm Minimum height: 215 mm Maximum height: 315 mm Usable key for upper pin: SW32 mm Threads used for top fixing: M8 Maximum capacity for each support: 100 Kg Fixing screw: M8 Fixing screw: M10  

Read more less

Application: Mercedes: Class C starting from 2010.

Read more less

The two head supports are implemented with non-scratch plastic material and are adjustable from 0 to 30°. There are two handles for locking when the right inclination is set. It is also possible to regulate the horizontal position of the head moving the pins to the opposite holes up and down. There is a long regulation also for the push rod in case of deep valve chambers. The frame can be rotated 30° on both sides. Also can be regulated forward and backwards. In case of valves locked hard into the seat, hit the slide hammer on the top with a plastic mallet. The bench is also provided with a travel limit device that guarantees the same stroke for each valve. When the valve spring is compressed, the operator can block the position using the opposite pin. Consequently you can work on the valves having both hands free. Technical data: Dimensions: 785x500x625 mm Stroke: 265 mm Cylinder head: 750 mm Length: min. 185 mm Inclination angle = 0° - 30° Total weight: 25,5 Kg Application: Cars and commercial vehicles

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts  Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Electronic safety protection Level heating temperature setting Easy to use 5" colour touch control panel Inductor cable 4.5M Ready to use with tip  Technical data Input power 18 KW-32 A, electrical connection IEC60309 INVERTER generator Voltage 400V 3PH+T 50 Frequency level 15-30khz 8 m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Release of highly corroded or seized bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Electronic safety protection Level heating temperature setting Easy to use 5" colour touch control panel Inductor cable 4.25M Ready to use with tip  Technical data Input power 13 KW-32 A, electrical connection IEC60309 INVERTER generator Voltage 400V 3PH+T 50 Frequency level 15-30khz 8 m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Electronic safety protection Easy to use 5" colour touch control panel Inductor cable 3M Ready to use with tip  Technical data Input power 8 KW-16 A, electrical connection IEC60309 INVERTER generator Voltage 230V 3PH+T 50 Frequency level 15-30khz 8 m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Power level setting (KW) Keyboard Inductor cable 3M Ready to use with tip  Technical data Input power 5 KW-16 A, electrical connection IEC60309 Voltage 400V 3PH+T 50 Frequency level 15-30khz Work cycle 30 min* (*± 5% ambient temperature maximum power) 8 m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Suspension, shock absorbers & mufflers removal Bending Crankshaft straightening  Advantages: Compact dimensions Power level setting (KW) Keyboard Inductor cable 2M Ready to use with tip  Technical data Input power 3.5 KW-16 A, IEC60309 electrical connection Voltage 230V/1PH - 50/60 Frequency level 15-30khz Duty cycle 5 min* (*± 5% ambient temperature maximum power) 2m of electrical cable Protection fuses 1 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less

Induction heating is a non-contact method that can be used to heat metals. The induction heater creates an alternating magnetic field that generates induced currents within the material. It is these induced currents that generate heat. The absence of open flames makes work easier, while ensuring safety and economic savings at the same time. It allows you to work even close to heat-sensitive parts Heat inducers are ideal for a wide range of applications such as: Unlocking bolts/nuts Unlocking and replacing pins or bearings Heating for straightening Preheating before welding Bending Thermal treatments  Advantages: Power level setting (KW) Keyboard Inductor cable 3M Ready to use with tip  Technical data Input power 5 KW-16 A, electrical connection IEC60309 Voltage 220V 1PH+T 50 Frequency level 15-30khz Work cycle 30 min* (*± 5% ambient temperature maximum power) 8m of electrical cable IP21 protection rating Protection fuses 20 litre tank capacity with liquid cooling system Hydraulic heat exchanger with fan

Read more less