On Car Brake Flaring - Flaremaster

11 products

  • Brake Pipe Flaring Tool - 4.75mm & 3/16in

    02725000 - Flaremaster2 - Brake Pipe Flaring Tool - 4.75mm, 3/16in Brake Pipes

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool 4.75mm, 3/16" Brake Pipes Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Hydraulic power unit provides portable power for precision flaring Inter-changeable die, held in place by magnets Creates SAE & DIN single and double flares (4.75mm, 3/16" pipe) Create full, or part sections of pipe, which can be trimmed, flared or spliced as required Supplied in foam & plastic case. 027250SS - Stainless Steel version also available, which Includes higher powered ram

  • 02725600 flaremaster 4.75 and 6mm kit  in box and foam

    02725600 - Flaremaster2 - Brake Pipe Flaring Tool - 4.75mm, 3/16in & 6mm

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool 4.75mm, 3/16in & 6mm brake pipes Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Inter-changeable dies, held in place by magnets Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Hydraulic power unit provides portable power for precision flaring Creates SAE & DIN single and double flares (4.75mm, 3/16 & 6mm pipe) Create full, or part sections of pipe, which can be trimmed, flared or spliced as required Supplied in moulded plastic box 027256SS - Stainless Steel version also available which includes a higher powered ram  

  • 02729500 flaremaster 2 kit in case with foam

    02729500 - Flaremaster2 - Flaring Kit - 4.75mm, 3/16in Brake Pipes

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool 4.75mm, 3/16in Brake Pipes Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Inter-changeable dies, held in place by magnets Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Creates SAE & DIN single and double flares Supplied in foam & plastic case. Contents: 02725500 - Flaremaster2 02160000 - Brake Pipe Aid Plier 02210000 - Telescopic Pipe Tube Cutter: 3 “ 32mm 02730000 - Pipe Deburring Tool: 3.2 “ 16mm 027295SS - Stainless Steel version also available which includes a higher powered ram

  • 02729600 - Flaremaster2 Brake Pipe Kit for 4.75 & 6.00mm Pipes

    02729600 - Flaremaster2 Brake Pipe Kit for 4.75 & 6.00mm Pipes

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Inter-changeable dies, held in place by magnets Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Creates SAE & DIN single and double flares Supplied in foam & plastic case.  Contents: 02725600 - Flaremaster2 02165000 - Brake Pipe Aid Plier 02210000 - Telescopic Pipe Tube Cutter: 3 “ 32mm 02730000 - Pipe Deburring Tool: 3.2 “ 16mm  027296SS - Stainless Steel version also available which includes a higher powered ram

  • 027250ss flaremaster tool - 4.75mm for stainless steel pipe - in box and foam

    027250SS - Flaremaster2 - Brake Pipe Flaring Tool Kit for Stainless Steel Pipe

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool 4.75mm, 3/16" Brake Pipes Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Hydraulic power unit provides portable power for precision flaring Inter-changeable die, held in place by magnets Creates SAE & DIN single and double flares (4.75mm, 3/16" pipe) Create full, or part sections of pipe, which can be trimmed, flared or spliced as required Supplied in moulded plastic box Stainless steel pipe is much more difficult to work with than standard cupro-nickel, copper or mild steel pipe. Flaring stainless steel brake pipes requires greater force and care in order to produce good results. For this reason, a special Metal Forming Compound is included within the kit in order to allow the material to form correctly.

  • 027296ss flaremaster kit for stainless steel pipe in case & foam

    027296SS - Flaremaster2 - Brake Pipe Faring Tool Kit For Stainless Steel Pipe 4.75 & 6mm

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Inter-changeable dies, held in place by magnets Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Creates SAE & DIN single and double flares Supplied in foam & plastic case. Stainless steel pipe is much more difficult to work with than standard cupro-nickel, copper or mild steel pipe. Flaring stainless steel brake pipes requires greater force and care in order to produce good results. For this reason, a special Metal Forming Compound is included within the kit in order to allow the material to form correctly.

  • 027295ss flaring kit for stainless steel pipe in case & foam

    027295SS - Flaremaster2 - Brake Pipe Flaring Kit for Stainless Steel

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool 4.75mm, 3/16in Brake Pipes Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Inter-changeable dies, held in place by magnets Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Creates SAE & DIN single and double flares Supplied in moulded plastic box Stainless steel pipe is much more difficult to work with than standard cupro-nickel, copper or mild steel pipe. Flaring stainless steel brake pipes requires greater force and care in order to produce good results. For this reason, a special Metal Forming Compound is included within the kit in order to allow the material to form correctly.

  • 027256ss flaremaster 4.75 and 6mm kit for stainless steel pipe in box and foam

    027256SS - Flaremaster2 - Brake Pipe Flaring Tool For Stainless Steel Pipe 4.75 & 6mm

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool 4.75mm, 3/16" & 6mm brake pipes Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Inter-changeable dies, held in place by magnets Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Hydraulic power unit provides portable power for precision flaring Creates SAE & DIN single and double flares (4.75mm, 3/16” & 6mm pipe) Create full, or part sections of pipe, which can be trimmed, flared or spliced as required Includes higher powered ram for flaring of Stainless Steel Pipes Supplied in moulded plastic box Stainless steel pipe is much more difficult to work with than standard cupro-nickel, copper or mild steel pipe. Flaring stainless steel brake pipes requires greater force and care in order to produce good results. For this reason, a special Metal Forming Compound is included within the kit in order to allow the material to form correctly.

  • 6mm upgrade kit for flaremaster 2 die set and 2 punches

    02726600 - Flaremaster2 - 6mm Upgrade Kit

    6mm upgrade kit for Flaremaster2 on car brake pipe flaring tool. Contains the necessary 6mm Dies & Punches to flare 6mm brake pipe. See kit contents table for more details on spares N.B. The Flaremaster2 6mm Upgrade Kit is only suitable for the Flaremaster2 (c/w blue handle) and not the original Flaremaster (c/w black handle)

  • 02727500 stainless steel upgrade hydraulic ram & washer

    02727500 - Flaremaster2 - Stainless Steel Upgrade

    Stainless steel upgrade kit for Flaremaster2 on car brake pipe flaring tool. Stainless steel pipe is much more difficult to work with than standard cupro-nickel, copper or mild steel pipe. Flaring stainless steel brake pipes requires greater force and care in order to produce good results. For this reason, a special Metal Forming Compound is included within the kit in order to allow the material to form correctly. Contents: 02727070 - Flaremaster2 - Hydraulic Ram for Stainless Steel Metal forming compound (Molyslip) 08513070 - M10 Washer Instructions for flaring stainless steel pipe (N.B. Uses standard Flaremaster SAE & DIN punches and dies)

  • 02725600 flaremaster 4.75 and 6mm kit  in box and foam

    027250SP - Flaremaster2 - Brake Pipe Flaring Tool - with free 6mm upgrade

    Flaremaster2 - The Original Hand Held Automotive Brake Pipe Flaring Tool 4.75mm, 3/16in & 6mm brake pipes Features: Quick-release chuck for positive engagement of the punch Fast-turn coarse thread on hydraulic ram, for quick assembly Locking bolt with swivel pin, for fast tightening Inter-changeable dies, held in place by magnets Enhanced bridge unit for greater strength Ergonomic handle moulding, for greater comfort Unique, original, patented design for producing high quality pipe flares - on the vehicle Flaring pipes on the vehicle allows for accurate repair sections to be spliced following repair work or accident damage Hydraulic power unit provides portable power for precision flaring Creates SAE & DIN single and double flares (4.75mm, 3/16 & 6mm pipe) Create full, or part sections of pipe, which can be trimmed, flared or spliced as required Supplied in moulded plastic box 027256SS - Stainless Steel version also availableIncludes higher powered ram  

On Car Brake Flaring - Flaremaster

Login

Forgot your password?

Don't have an account yet?
Create account