Govoni Workshop Tools
GO829 - Locking Snap Ring Pliers
Locking Pliers supplied with 4 sets of interchangeable clamps for tightening the snap ring on the transmission shaft. There pliers ensure mounting without risk of damage to the rush (clips) of the teeth when inserting the bowl on the transmission shaft. Includes: 1 x Pliers 2 x Ø23.8mm half shell 2x Ø24.6mm half shell 2x Ø26.9mm half shell 2x Ø28.5mm half shell
GO807 - Hose Clamp Pliers
Due to the particular shape of the arms, these pliers allow you to easily open and close CAILLAU CLIC (55, 66, 86), CLIC R (R66, R86, R96) and CLIC E clamps With these pliers it is possible to open and close screwless hose clamps It is possible to change from the opening to the closing function by rotating the pliers 180° Ergonomic, self-opening handles with different colours to identify the opening and closing functions For vehicle engine and chassis, fuel lines, air filters, steering, drive shaft sleeves, as well as other industrial and electrical sectors
GO527 - Single Hook for Slide Hammer
For use with GO520 & GO530 Universal slide hammer use when paired with GO522 M18 x 1.5 adaptor Compatible with 10mm steel chains Special hook design provides reliable fitting High-quality hardened and tempered steel construction Includes mounting bolts
GO526 - Double Hook for Slide Hammer
For use with GO520 & GO530 Universal slide hammer use when paired with GO522 M18 x 1.5 adaptor Special hook design provides reliable fitting High-quality hardened and tempered steel construction Universal adaptation on each chain end, independent of manufacturing and for tension brackets with notch cone/ conical collar No twisting of chain during turning and rehanging Includes mounting bolts
GO522 - Slide Hammer Adaptor M18 x 1.5
For use with GO520 & GO530 System adapter tool with mounting bore (jointed connection) for universal hooks/double extractor hooks/bow hooks/bodywork pull clamps etc. Allows GO526 and GO527 to be used with slide hammers
GO076 - Gerridae Quick Connector Release Tool
Special tool to release/open quick-couplings with double-click lock (2 buttons). This product is equipped with two different sized tool heads, with the longer tool head including a joint for better access. Universally applicable for fuel quick-couplings on cars, vans, trucks, etc. Technical data Total Length: 198 mm
GO1151 - Universal Wiper Extractor with Adjustable Fork
Extractor for removing the wiper arm from the wiper shaft Special version with adjustable fork spring Extraction spindle with aluminium turning head to prevent damage to shaft Ultra-thin fork design for usage in narrow spaces Wide radius for work on large wipers Strong design for use on blocked windscreen wipers Wide adjustment range covers different sizes Spring mechanism balances the pressure on half-fork Technical Specifications: Screw - M10 x 1.0 Connection - SW 17 mm Fork width - 16 “ 38 mm Working height - 48 mm Weight - 0.5 kg Not suitable for use with air/impact tools.
GO1127 - Locking Wiper Puller with Hammerhead
Required to remove the wiper arm from the wiper arm shaft. The special design with an adjustable fork width (spring mechanism) and narrow fork ensures high model coverage and good access even in confined spaces. Puller spindle with movable pressure head, meaning no damage to the wiper arm shaft.
GO1503 - Battery Lifting Accessory Kit
Required to hold battery pack, engine or transmission on the platform, safely. The components fit perfectly to the different types of batteries, taking into consideration the possible specifications of the manufacturer. Slotted holes in the foot allow easy changing/moving of the platform. The support columns are height-adjustable and have a thread for screwing the rubbers/spacers. Used for platforms with M8 and M10 threaded holes. Specifications: Support foot length: 200 mm Minimum height: 215 mm Maximum height: 315 mm Usable key for upper pin: SW32 mm Threads used for top fixing: M8 Maximum capacity for each support: 100 Kg Fixing screw: M8 Fixing screw: M10
GO012 - CV Joint & Drive Shaft Extraction Set
Kit for the extraction of seized and blocked transmission shafts. Includes a flange with multiple holes to ensure greater coverage of the models on the market: suitable for hubs with 2, 3, 4, 5 and 6 holes or bolts. Can be used on a range of vehicles from cars to commercial vehicles. Extremely suitable for stuck transmissions shafts on VW/Mazda/Ford Models. Components: 1 x extractor 1-1 / 2 “-16G 1 x adapter for pushing screw 1-1 / 2 “-16G x M22x2.0 1 x thrust screw M22x2.0 1 x flange, 96-142 mm for 3, 4, 5 and 6- holes, or bolts of size M12 / M14 5 x conical washer H = 5 mm 6 x conical spacers H = 25 mm 1 x impact screw 1 x handle for impact screw Technical data: For holes / Bolts: M12 and M14 Working range: M12: Ø96-138 mm / M14: Ø98-136 mm