Bodyshop General Tools

Precision Tool for Releasing Seized Components The Vibro Impact Air Hammer is an innovative solution designed to tackle the challenges of removing seized suspension parts and other stubborn components.  Utilizing a controlled, air-powered impact system, it delivers precise force to loosen rusted or corroded parts without causing collateral damage. Key Features: Controlled Impact Delivery: The Vibro-Impact system allows operators to gradually increase force, ensuring effective loosening of seized components while minimizing the risk of damage. Integrated Shock Absorber: Built in shock absorbing technology reduces the cancel of over application of force, protecting both the tool and the workpiece. Low Vibration Operation: Engineered for user comfort, the tool's low vibration design reduces fatigue during prolonged use. Comprehensive Accessory Set: Includes four interchangeable impact hammers and a conventional wall-mounted storage bracket for organized tool management. Technical Specifications: Weight: 2.49kg Length: 290mm Air Supply Requirement: 6.2bar (90psi) Air Consumption: 114 ltrs / min Impact Rate: 2200 bpm Noise level: 100dBA Versatile Applications: While specifically designed for suspension components, the Vibro Impact Air Hammer proves invaluable for carious tasks, including: Removing seized or rusted nuts and bolts across different vehicle parts Extracting injectors that are no longer needed for reuse Disassembling conical seat connections, wheel bearings and bushes Spare Parts: 90221000 - Vibro Impact Bit - Tie Rod Separator 90222000 - Vibro Impact Bit - Hammer 90223000 - Vibro Impact Bit - Ball Joint Separator 90228000 - Vibro Impact Bit - 1/2" Square Drive

Read more less

Additional part for use with 90245000 Heavy Duty 'Vibro-Impact' Air Hammer

Read more less

Additional part for use with 90206000 'Vibro-Impact' Air Hammer Concave design locates hammer insert for concentrated effort Ideal for use on bolts & pins Length: 150mm

Read more less

Separator accessory Grooved non-twist body shaft design securely locks into vibro-impact air hammer (90206000) for precise use

Read more less

Sheet metal cutter accessory Grooved non-twist body shaft design securely locks into vibro-impact air hammer (90206000) for precise use

Read more less

7 Piece 3/4"  Impact Socket Set  Includes 7 x popular socket sizes: 24, 27, 30, 32, 33, 36 and 41mm and 1 x 175mm extension

Read more less

Additional part for use with 902450SP Heavy Duty 'Vibro-Impact' Air Hammer

Read more less

Additional part for use with 902450SP Heavy Duty 'Vibro-Impact' Air Hammer

Read more less

Additional part for use with 902450SP Heavy Duty 'Vibro-Impact' Air Hammer

Read more less

Set of 2 x chisels for cutting the inner and outer exhaust tube for use with 90206000 'Vibro-Impact' Air Hammer

Read more less

The heavy duty Vibro-Impact® air hammer is for applications including loosening tight connections on vehicles such as HGVs, agricultural and construction vehicles. No insert included using this part number (please see related). The high performance airhammer helps to disassemble conical seat connections, wheel bearings, bushes, rusted screw connections etc. A unique concept to aid the removal of seized suspension parts The ˜Vibro-Impact system allows for the controlled application of force via an air powered Impact Hammer Allows the operator to control and gradually increase the force being applied, in order to loosen seized components Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied. Low vibration for user comfort Technical Data Drive: 15mm / Hex Weight: 5.4 Kgs Length: 380 mm Air Nipple: 3/8" Air Hose: 13mm / 1/2" Air Consumption: 210 l/min Impacts/min: 2,500 Bpm Air Pressure: 6.2 bar Noise Pressure Level: 104 dbA Noise Performance Level: 115 dbA Vibration Acceleration: 20.4 m/s²

Read more less

Additional part for use with 90206000 'Vibro-Impact' Air Hammer Half round chisel

Read more less

Metal skin wedge tools are useful for levering and moving the ends of sheet metal casing without causing marks and scratches.   Length 212mm  

Read more less

Metal skin wedge tools are useful for levering and moving the ends of sheet metal casing without causing marks and scratches.   Length: 175mm    

Read more less

This innovative panel gap gauge set includes three colour-coded pairs of gauges, each equipped with suction pads and flexible arms for precise, hands free application. Designed with soft rubber and plastic materials, they ensure accurate measurements without scratching or damaging surfaces. Features: Suction pads for easy alignment Flexible arms for versatile positioning Soft, Non Marking Materials to protect painted surfaces Colour Coded Gauges for easy identification and matching Measurement Range 1-10mm

Read more less

This ergonomic and particularly lightweight holder permits individual tensioning of car body file blades to match the surface contour of the workpiece. Advantages: The bending radius of the file can be steplessly adjusted via the tensioning system. Particularly lightweight plastic design without plasticizer. Can be used in a focused manner or over a wide area as the car body file can be used curved as well as straight. Enables work with low levels of fatigue thanks to vibration-damping rubber pad. Suitable for file length 350mm

Read more less

This ergonomic and particularly lightweight holder permits individual tensioning of car body file blades to match the surface contour of the workpiece. Advantages: The bending radius of the file can be steplessly adjusted via the tensioning system. Particularly lightweight plastic design without plasticizer. Can be used in a focused manner or over a wide area as the car body file can be used curved as well as straight. Enables work with low levels of fatigue thanks to vibration-damping rubber pad. Suitable for file length 300mm

Read more less

Car body file blades can be tensioned individually in the car body file holder and can be adapted to match the surface contour of the workpiece. Advantages: The bending radius of the file can be steplessly adjusted via the tensioning system. Convex shape of the file prevents unwanted scratches. Can be used in a focused manner. Razor-sharp tooth edges. Specifications: Length: 350mm Teeth Per Inch: 12 Type: Fine Can be used with KFH350MM Body Blade Holder

Read more less

Specially heat treated alloy steel provides hardness with flexibility Length: 356mm Precision cut teeth Blade edges chamfered Maximum deflection of 14mm Standard Flat Cut 9tpi    

Read more less

Adjustable blade holder, suitable for forming & shaping fillers and metal during body repair work Steel tension adjuster and base plate Compatible with most flat profile 356mm body blades Robust construction with steel tension adjuster, sole plate and tough plastic handle 2 position handle for vertical or horizontal use   Individual blades available: 05711100 - Body Blade Standard Flat Cut 9 tpi 05711200 - Body Blade Fine Flat Cut 12 tpi 05711500 - Body Blade Plasticut Flat Cut 6 tpi

Read more less