Bearing Separators, Extraction & Installation

70 products

  • 09500000 - Mechanical Bearing Separator - 10-62mm

    09500000 - Mechanical Bearing Separator - 10-62mm

    Individual separator for removing and refitting bearings, etc.Can be used with any of the Sykes-Pickavant design of pullers where standard legs cannot gain access.Tapered legs provide all round support.Supplied in carton. External Spread Min - Max: 10-62mm Compatible with: 09301500 Main Rod for Mechanical Puller – Sykes Pickavant.   Found in Kits: 08420600 - Mechanical Puller & Separator Kit 350mm – Sykes Pickavant 09300000 - Mechanical External Separator Kit – Sykes Pickavant 15530500 - Comprehensive Hydraulic Puller/Separator/Extractor Kit – Sykes Pickavant 19310500 - Hydraulic Internal Extractor, Puller & Separator Kits with – Sykes Pickavant  

  • 09510000 - Mechanical Bearing Separator - 20-110mm

    09510000 - Mechanical Bearing Separator - 20-110mm

    Individual separator for removing and refitting bearings, etc.Can be used with any of the Sykes-Pickavant design of pullers where standard legs cannot gain access.Tapered legs provide all round support.Supplied in carton. External Spread Min - Max: 20-110mm   Compatible with: 09311500 - Main Rod Assembly – Sykes Pickavant   Found in Kits: 08420600 - Mechanical Puller & Separator Kit 350mm – Sykes Pickavant 15520000 - Hydraulic Puller & Separator Kit 50-150mm – Sykes Pickavant 155200TC - Hydraulic Puller & Separator Kit - Tool Control – Sykes Pickavant 155200XT - Hydraulic Puller & Separator Kit - Extra Travel – Sykes Pickavant 15520800 - Hydraulic Puller & Separator Kit – Sykes Pickavant 15530500 - Comprehensive Hydraulic Puller/Separator/Extractor Kit – Sykes Pickavant 155400V2 - Hydraulic Puller & Separator Kit – Sykes Pickavant 155405V2 - Hydraulic Puller & Separator Kit – Sykes Pickavant 155700V2 - Hydraulic Internal Extractor, Puller & Separator Kit – Sykes Pickavant 155900V2 - Hydraulic Internal Extractor, Puller & Separator Kit - Mast – Sykes Pickavant 19310000 - Hydraulic Separator Kit – Sykes Pickavant 19310100 - Hydraulic Separator Kit exc Ram – Sykes Pickavant 19310300 - Hydraulic Puller & Separator Kit - Thin Jaw – Sykes Pickavant 19310500 - Hydraulic Internal Extractor, Puller & Separator Kits with – Sykes Pickavant

  • 09520000 - Mechanical Bearing Separator - 35-134mm

    09520000 - Mechanical Bearing Separator - 35-134mm

    Individual separators for removing and refitting bearings, etc.Can be used with any of the Sykes-Pickavant design of pullers where standard legs cannot gain access.Tapered legs provide all round support.Supplied in carton. External Spread Min - Max: 35-134mm Can be used with 08320000 & 08330000 Twin Leg Pullers or 09420000 Twin Leg Pulling Unit Compatible with: 09321500 - Main Rod Assembly 332mm – Sykes Pickavant Found in Kits: 08420600 - Mechanical Puller & Separator Kit 350mm – Sykes Pickavant 155800V2 - Hydraulic Internal Extractor, Puller & Separator Kit – Sykes Pickavant 155900V2 - Hydraulic Internal Extractor, Puller & Separator Kit - Mast – Sykes Pickavant 15600000 - Hydraulic Internal/External Puller & Separator Kit – Sykes Pickavant 19320000 - Hydraulic Separator Kit - Heavy Duty – Sykes Pickavant 19320100 - Hydraulic Separator Kit - heavy Duty exc Ram – Sykes Pickavant  

  • 09530000 - Mechanical Bearing Separator - 50-175mm

    09530000 - Mechanical Bearing Separator - 50-175mm

    Individual separators for removing and refitting bearings, etc.Can be used with any of the Sykes-Pickavant design of pullers where standard legs cannot gain access.Tapered legs provide all round support.Supplied in carton. External Spread Min - Max: 50 - 175mm Can be used with Sykes-Pickavant Loadstar Heavy Duty Pullers or 09430000 Twin Leg Pulling Unit Found in Kits: 20202000 20 Tonne Loadstar "Plus" Separator Add-on Pack – Sykes Pickavant 20205000 - 20 Tonne Loadstar "Plus" Comprehensive Kit – Sykes Pickavant 20302000 - 30 Tonne Loadstar "Plus" Separator Add-On Pack – Sykes Pickavant 20305000 - 30 Tonne Loadstar "Plus" Comprehensive Kit – Sykes Pickavant 20502000 - 50T Loadstar "Plus" Separator Add-On Pack – Sykes Pickavant 20505000 - 50T Loadstar "Plus" Comprehensive Kit – Sykes Pickavant  

  • 09580100 Slide Hammer and Split collet Extractor Kit

    09580100 - Slide Hammer & Split Collet Extractor Kit

    Extract components quickly and efficiently when conventional pullers cannot be used. Removes gears, bearings, oil seals etc. Additional twin beam pulling unit available part no. 09580500. Specifications: Internal Spread Min - Max: 6.5 - 12mm No. of Split Collet Extractors: 3 Slide Hammer Thread Size 1/2" x 20 UNF Contents: 08542100 - Slide Hammer Assembly - 1kg 09580900 - Split Collet Extractor 6.5 - 8mm 09581000 - Split Collet Extractor 8.5 - 10mm 09581100 - Split Collet Extractor 10 - 12mm 09582000 - 1/2" Female to M8 male converter

  • 09580200 Slide Hammer and Split Collet Extractor Kit

    09580200 - Slide Hammer & Split Collet Extractor Kit

    Extract components quickly and efficiently when conventional pullers cannot be used. Removes gears, bearings, oil seals etc. Additional twin beam pulling unit available part no. 09580500. Specifications: Internal Spread Min - Max: 12-17mm and 19-30mm No. of Split Collet Extractors: 3 Slide Hammer Thread Size 1/2" x 20 UNF Contents: 08542100 - Slide Hammer Assembly - 1kg 09580900 - Split Collet Extractor 6.5 - 8mm 09581200 - Split Collet Extractor 12 - 17mm 09581300 - Split Collet Extractor 19 - 22mm 09581400 - Split Collet Extractor 22 - 30mm 09582000 - 1/2" Female to M8 male converter

  • 09580300 slide hammer extractor kit

    09580300 - Slide Hammer & Split Collet Extractor Kit

    Extract components quickly and efficiently when conventional pullers cannot be used. Removes gears, bearings, oil seals etc. Additional twin beam pulling unit available part no. 09580500. Specifications: Internal Spread Min - Max: 30-60 mm No. of Split Collet Extractors: 3 Slide Hammer Thread Size 1/2" x 20 UNF Contents: 08542100 - Slide Hammer Assembly - 1kg 09581500 - Split Collet Extractor 30 - 38mm 09581600 - Split Collet Extractor 38-50mm 09581700 - Split Collet Extractor 50-60mm

  • 09580400 Slide Hammer Extractor Kit

    09580400 - Slide Hammer & Split Collet Extractor Kit

    Extract components quickly and efficiently when conventional pullers cannot be used. Removes gears, bearings, oil seals etc. Additional twin beam pulling unit available part no. 09580500. Specifications: Internal Spread Min - Max: 8.5 - 17 mm and 19 - 22 mm No. of Split Collet Extractors: 4 Slide Hammer Thread Size 1/2" x 20 UNF Contents: 08542100 - Slide Hammer Assembly - 1kg 09581000 - Split Collet Extractor 8.5 - 10mm 09581100 - Split Collet Extractor 10 - 12mm 09581200 - Split Collet Extractor 12 - 17mm 09581300 - Split Collet Extractor 19 - 22mm 09582000 - 1/2" Female to M8 male converter  

  • 09580500 twin beam pulling unit

    09580500 - Twin Beam Pulling Unit

    Twin beam mechanical puller for use with Sykes-Pickavant Split Collet type internal extractors. Mechanical force screw can be used to draw extractors in place of slide hammer.

  • 09580600 split collet extractor kit

    09580600 - Bearing Extractor Set 57-75mm

    A safe and simple pulling solution for larger bearings found on engines, gearboxes and industrial machinery. Specification:  Internal spread 57-75 mm Contents 09582100 - 57-75mm Bearing Extractor 09311500 - Main Rod Assembly x 2 09311200 - Twin Beam 205mm 09584300 - Force Screw 09311400 - Thrust Nut 09312100 - Thrust Race 09312000 - Thread Protector -63mm 09584200 - Adaptor Supplied in Metal Tin Also available 09582200 - Bearing Extractor 74-100mm This kit is also compatible with slide hammer 08532000* adaptor required 09582300

  • 09580700 split collet extractor kit

    09580700 - Bearing Extractor Set 74-100mm

    A safe and simple pulling solution for larger bearings found on engines, gearboxes and industrial machinery. Contents: 09582200 - 74-100 mm Bearing Extractor 09311500 - Main Rod Assembly x 2 09311200 - Twin Beam 205mm 09584300 - Force Screw 09311400 - Thrust Nut 09312100 - Thrust Race 09312000 - Thread Protector -63mm 09584200 - Adaptor Supplied in Metal Tin Also available 09582100 - Bearing Extractor 57-75mm This kit is also compatible with slide hammer 08532000* adaptor required 09582300

  • 09580800 split collet extractor set

    09580800 - Bearing Extractor Set 57-100mm

    A safe and simple pulling solution for larger bearings found on engines, gearboxes and industrial machinery. Contents 09582100 - 57-75 mm Bearing Extractor 09582200 - 74-100 mm Bearing Extractor 09311500 - Main Rod Assembly x 2 09311200 - Twin Beam 205 mm 09584300 - Force Screw 09311400 - Thrust Nut 09312100 - Thrust Race 09312000 - Thread Protector -63mm 09584200 - Adaptor Supplied in Metal Tin This kit is also compatible with slide hammer 08532000* adaptor required 09582300

  • 09580900 split collet

    09580900 - Split Collet Extractor 6.5 - 8mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications: Internal Spread Min - Max: 6.5 - 8 mm No.00 - stamped on extractor Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads ** 08542100 - Slide Hammer Assembly - (1kg) ** ** Additional part 09582000 (converter from M8 to 1/2” UNF) must be attached for use with slide hammer Found in kits: 09580000 - Internal Split Collets Extractor Kit 09580100 - Slide Hammer & Split Collet Extractor Kit 19310500 - Hydraulic Internal Extractor, Puller & Separator Kit

  • 09581000 Split collet Extractor

    09581000 - Split Collet Extractor 8.5 - 10mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications: Internal Spread Min - Max: 8.5 - 10 mm No.0 - stamped on extractor Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads ** 08542100 - Slide Hammer Assembly - (1kg) ** ** Additional part 09582000 (convertor from M8 to 1/2” UNF) must be attached for use with slide hammer Found in kits: 09580000 - Internal Split Collets Extractor Kit 09580100 - Slide Hammer & Split Collet Extractor Kit 09580400 - Slide Hammer & Split Collet Extractor Kit 19310500 - Hydraulic Internal Extractor, Puller & Separator Kit

  • 09581100 split collet extractor

    09581100 - Split Collet Extractor 10 - 12mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications: Internal Spread Min - Max: 10-12mm No.1 - stamped on extractor Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads ** 08542100 - Slide Hammer Assembly - (1kg) ** ** Additional part 09582000 (convertor from M8 to 1/2” UNF) must be attached for use with slide hammer Found in kits: 09580100 - Slide Hammer & Split Collet Extractor Kit 09580400 - Slide Hammer & Split Collet Extractor Kit 19310500 - Hydraulic Internal Extractor, Puller & Separator Kit 08540400 - Slide Hammer Combi Puller & Extractor Kit

  • 09581200 - Split Collet Extractor 12 - 17mm

    09581200 - Split Collet Extractor 12 - 17mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications: Internal Spread Min - Max: 12 - 17 mm No.2 - stamped on extractor Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads ** 08542100 - Slide Hammer Assembly - (1kg) ** ** Additional part 09582000 (convertor from M8 to 1/2” UNF) must be attached for use with slide hammer Found in kits: 09580000 - Internal Split Collets Extractor Kit 09580200 - Slide Hammer & Split Collet Extractor Kit 09580400 - Slide Hammer & Split Collet Extractor Kit 19310500 - Hydraulic Internal Extractor, Puller & Separator Kit 08540400 - Slide Hammer Combi Puller & Extractor Kit

  • 09581300 split collet

    09581300 - Split Collet Extractor 19 - 22mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications:  Internal Spread Min - Max: 19-22mm No.3 - stamped on extractor Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads ** 08542100 - Slide Hammer Assembly - (1kg) ** ** Additional part 09582000 (converter from M8 to 1/2” UNF) must be attached for use with slide hammer Found in kits: 09580000 - Internal Split Collets Extractor Kit 09580200 - Slide Hammer & Split Collet Extractor Kit 09580400 - Slide Hammer & Split Collet Extractor Kit 19310500 - Hydraulic Internal Extractor, Puller & Separator Kit 08540400 - Slide Hammer Combi Puller & Extractor Kit

  • 09581400 split collet extractor

    09581400 - Split Collet Extractor 22 - 30mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications: Internal Spread Min - Max: 22-30 mm No.4 - stamped on extractor Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads 08542100 - Slide Hammer Assembly - (1kg) Found in kits: 09580000 - Internal Split Collets Extractor Kit 09580200 - Slide Hammer & Split Collet Extractor Kit 19310500 - Hydraulic Internal Extractor, Puller & Separator Kit 08540400 - Slide Hammer Combi Puller & Extractor Kit

  • 09581500 split collet extractor

    09581500 - Split Collet Extractor 30 - 38mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications: Internal Spread Min - Max: 30-38mm No.5 - stamped on extractor Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads 08542100 - Slide Hammer Assembly - (1kg) Found in kits: 09580000 - Internal Split Collets Extractor Kit 09580300 - Slide Hammer & Split Collet Extractor Kit 19310500 - Hydraulic Internal Extractor, Puller & Separator Kit

  • 09581600  Split Collet Extractor 38-50mm

    09581600 - Split Collet Extractor 38-50mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications: Internal Spread Min - Max: 38-50mm No.6 - stamped on extractor Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads 08542100 - Slide Hammer Assembly - (1kg) Found in kits: 09580000 - Internal Split Collets Extractor Kit 09580300 - Slide Hammer & Split Collet Extractor Kit

  • 09581700 split collet extractor

    09581700 - Split Collet Extractor 50-60mm

    The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications:  Internal Spread Min - Max: 50-60mm No.7 - stamped on extractor (Previous models were No.9) Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads 08542100 - Slide Hammer Assembly - (1kg) Found in kits: 09580000 - Internal Split Collets Extractor Kit 09580300 - Slide Hammer & Split Collet Extractor Kit

  • 09581800 split collet extractor

    09581800 - Split Collet Extractor 55 - 64mm

    Extract components quickly and efficiently when conventional pullers cannot be used. Removes gears, bearings, pinions, oil seals etc. The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications: Internal Spread Min - Max: 55 - 64 mm ½" UNF fitting Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads ** 08542100 - Slide Hammer Assembly - (1kg) **

  • 09582100 - Bearing Extractor 57-75mm

    09582100 - Bearing Extractor 57-75mm

    Extract components quickly and efficiently when conventional pullers cannot be used. Removes larger bearings found on engines, gearboxes and industrial machinery.  The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specification Thread Size: M16 x 2 Size: 57-75mm Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads* *requires adapator 09582300 Found in Kits: 09580600 - Bearing Extractor Set 57-75mm 09580800 - Bearing Extractor Set 57-100mm 09585600 - Slide Hammer Bearing Extractor Set 57-75mm 09585800 - Slide Hammer Bearing Extractor Set 57-100mm

  • 09581900 Split Collet Extractor 65 - 76mm

    09581900 - Split Collet Extractor 65 - 76mm

    Extract components quickly and efficiently when conventional pullers cannot be used. Removes gears, bearings, pinions, oil seals etc. The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force. Specifications:  Internal Spread Min - Max: 65 - 76 mm ½" UNF fitting Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads ** 08542100 - Slide Hammer Assembly - (1kg) **

  • 09582200 - Bearing Extractor 74-100mm

    09582200 - Bearing Extractor 74-100mm

    Bearing Extractor 74-100mm Coverage for larger bearings found on engines, gearboxes and industrial machinery.  Specification Thread Size: M16 x 2 Size: 74-100mm   Compatible with: 08532000 - Slide Hammer (2Kg) Double Ended Threads  (requires adapator 09582300) Found in Kits: 09580700 - Bearing Extractor Set 74-100mm 09580800 - Bearing Extractor Set 57-100mm 57-75mm option also available as part number 09582100 

  • 09660000 - Bearing Installation Kit 26 - 47mm

    09660000 - Bearing Installation Kit 26 - 47mm

    26 - 47mm Ø Range For use with a soft faced hammer Suitable for use on bearings, bushes and nylon seals etc. with various types of profile Features Ø25mm mounting tube  Includes a range of aluminium adaptors for full face support, preventing damage and premature failure Supplied in foam & plastic case

  • 09660100 - Bearing Installation Kit 42 - 72mm

    09660100 - Bearing Installation Kit 42 - 72mm

    42 - 72mm Ø Range For use with a soft faced hammer Suitable for use on bearings, bushes and nylon seals etc. with various types of profile Features Ø38mm mounting tube  Includes a range of aluminium adaptors for full face support, preventing damage and premature failure Supplied in foam & plastic case

  • 09660200 - Bearing Installation Kit 62 - 100mm

    09660200 - Bearing Installation Kit 62 - 100mm

    62 - 100mm Ø Range For use with a soft faced hammer Suitable for use on bearings, bushes and nylon seals etc. with various types of profile Features Ø60mm mounting tube  Includes a range of aluminium adaptors for full face support, preventing damage and premature failure Supplied in foam & plastic case

  • 69680200 - KM Socket and Extension Tube Complete Kit

    69680200 - KM Socket and Extension Tube Complete Kit

    Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2 driveComes with extension pieces to allow easy access to deep seated lock nutsKit Includes: KM 4 and Extension Tube  KM 5 and Extension Tube KM 6 and Extension Tube  KM 7 and Extension Tube KM 8 and Extension Tube  KM 9 and Extension Tube  KM 10 and Extension Tube  

  • 69680100 - KM Socket and Extension Tube Kit

    69680100 - KM Socket and Extension Tube Kit

    Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2 drive.Comes with extension pieces to allow easy access to deep seated lock nuts.Kit Includes: KM 4 and Extension Tube  KM 5 and Extension Tube KM 6 and Extension Tube  KM 7 and Extension Tube

  • 69680000 - KM Socket Kit

    69680000 - KM Socket Kit

    Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive. Kit Includes:  KM 4 KM 5 KM 6 KM 7 KM 8 KM 9 KM 10

  • 696800-KM2 - KM 2 Socket

    696800-KM2 - KM 2 Socket

    KM 2 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM3 - KM3 Socket

    696800-KM3 - KM3 Socket

    KM3 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM4 - KM4 Socket

    696800-KM4 - KM4 Socket

    KM4 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.  

  • 696800-KM4EXT - KM4- Extension Tube

    696800-KM4EXT - KM4- Extension Tube

    KM4- ExtensionTube   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • KM 5 - KM Socket

    696800-KM5 - KM5 Socket

    KM5 Socket Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM5EXT - KM5- Extension Tube

    696800-KM5EXT - KM5- Extension Tube

    KM5- Extension Tube   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM6 - KM6 Socket

    696800-KM6 - KM6 Socket

    KM6 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM6EXT - KM6- Extension Tube

    696800-KM6EXT - KM6- Extension Tube

    KM6- Extension Tube   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM7 - KM7 Socket

    696800-KM7 - KM7 Socket

    KM7 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM7EXT - KM7- Extension Tube

    696800-KM7EXT - KM7- Extension Tube

     KM7 Extension Tube   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM8 - KM8 Socket

    696800-KM8 - KM8 Socket

    KM8 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM8EXT - KM8- Extension Tube

    696800-KM8EXT - KM8- Extension Tube

    KM8 Extension Tube   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM9 - KM9 Socket

    696800-KM9 - KM9 Socket

    KM9 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM9EXT - KM9- Extension Tube

    696800-KM9EXT - KM9- Extension Tube

    KM 9 Extension Tube   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM10 - KM10 Socket

    696800-KM10 - KM10 Socket

    KM10 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM10EXT - KM10 Extension Tube

    696800-KM10EXT - KM10 Extension Tube

    KM10 Extension Tube   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

  • 696800-KM11 - KM11 Socket

    696800-KM11 - KM11 Socket

    KM11 Socket   Sockets designed for easy tightening and loosening of lock nuts in a safe manner. They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves. Easy mounting and dismounting without nut damage. The socket demands less space around the bearing arrangement than when using a hook spanner and allows the use of ratchets and torque wrenches via a 1/2" drive.

Bearing Separators, Extraction & Installation

Login

Forgot your password?

Don't have an account yet?
Create account