Fastener Tools

Hydraulic Nut Splitter - 37mm Removes seized nuts without damaging threads Allen key hex drive 37mm capacity Supplied in steel storage case

Read more less

Mechanical Nut Splitter for nut diameters from 4 to 17mm Features a flat upper edge to prevent the nut from rotating whilst splitting. Improved nut placement and perpendicular chisel position allows for an easy nut split without damage to the thread. Thread - Up to M10 Max. Torque - 38 Nm Dimensions - M14 x 1.5 x 47mm

Read more less

Mechanical Nut Splitter for nut diameters from 8 - 24mm Features a flat upper edge to prevent the nut from rotating whilst splitting. Improved nut placement and perpendicular chisel position allows for an easy nut split without damage to the thread. Thread - M5 - M16 Max. Torque - 50 Nm Dimensions - M14 x 1.5 x 47mm

Read more less

Mechanical Nut Splitter for nut diameters from 19 - 36mmFeatures a flat upper edge to prevent the nut from rotating whilst splitting. Improved nut placement and perpendicular chisel position allows for an easy nut split without damage to the thread. Thread - M12 - M24 Max. Torque - 190 Nm

Read more less

9 Piece Hook, Pick & Scraper Set Hardened chrome vanadium steel Ergonomic soft grip handles Includes multi-purpose scraper, ideal for gasket scraping Set of 9 hooks, picks and scraper, ideal for the fitting and removal of:- O rings - Seals - Bushes - Springs - Cotter Pins - Fuses etc Supplied in moulded storage tray Contents:4 x standard hooks & picks / 4 x mini hooks & picks / 1 x straight edge scraper

Read more less

Screw Extractor Set (5 Piece) Spiral LH screw extractors (easy-outs) 3 - 19mm capacity Supplied in plastic case

Read more less

For use with a medium weight hammer, to loosen stubborn screws and nuts Supplied in storage case, with 14 inter-changeable bits Contents: Impact driver with 5/16 Hex 3 x Slotted Blade: 5/16, 3/8, 1/2 4 x XPT head: No 1, No 2, No 3, No 4 3 x Hexagon: 4, 5, 6, 10 mm 4 x Torx head: T30. T40, T45, T50

Read more less

For repairing damaged threads where a conventional die cannot be used Provides eight pitch sizes of thread form Thread Form BSW / BSF Pitch Sizes 11, 12, 14, 16, 18, 20, 22, 26

Read more less

For repairing damaged threads where a conventional die cannot be used Provides eight pitch sizes of thread form Thread Form SAE / UNF Pitch Sizes 11, 12, 13, 14, 16, 18, 20, 24

Read more less

For repairing damaged threads where a conventional die cannot be used Each restorer provides eight pitch sizes of thread form Thread Form METRIC Pitch Sizes 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00

Read more less

For repairing damaged threads where a conventional die cannot be used Each restorer provides eight pitch sizes of thread form Thread Form BSP Pitch Sizes 11, 12, 14, 16, 19, 20, 22, 28

Read more less

Heavy Duty Circlip Tool 0-90mm Leg Opening Operation Provides safe and stable service of extra large circlips Compound screw lever for easy installation and removal of large circlips with a diameter of 90-175mm and holes between 0 - 90mm apart Tip Sizes: Bent 20 degrees: 3mm, 3.8mm, 4.6mm Bent 72 degrees: 3mm, 3.8mm, 4.6mm Tip kit contains durable alloy colour coded tips and hex key Packaged in black blow-molded case

Read more less

Straight Fluted Extractor Set For the removal of broken studs 6 - 12mm diameter Broken stud is drilled & an extractor is used to remove the remains of the stud Contents: 5 x Drill Bits 10 x Drill Guides 5 x Extractor Assemblies

Read more less

Replacement Blade suitable for 03360500 Mechanical Nut Splitter   High performance blades also available 033605-20

Read more less

High performance blade suitable for 03360500 Mechanical Nut Splitter  A high performance cutting blade is recommended for splitting M24 nuts, stainless steel nuts and high quality nuts   

Read more less

Replacement Blade suitable for 03360600 Mechanical Nut Splitter   High performance blades also available 033606-20

Read more less

High performance blade suitable for 03360600 Mechanical Nut Splitter A high performance cutting blade is recommended for splitting M24 nuts, stainless steel nuts and high quality nuts 

Read more less

Replacement Blade suitable for 03360700 Mechanical Nut Splitter   High performance blades also available 033607-20

Read more less

Acentric wheel provides powerful grip, for stud setting or removing rusted and stubborn studs 1/2" sq. drive Capacity 6mm - 19mm studs

Read more less

4 piece 1/2 sq drive Concentric Roller Stud Extractor Set Sizes:  M6 M8 M10 M12 Supplied in moulded plastic box

Read more less

Suitable for M5-M16 threads Our new range of External Thread Reform Tools use innovative non-cutting technology to return threads back to their original shape Allows original parts to be reused rather than replaced Works on all types of thread including metric, fine and imperial with compatible rollers No external energy source is required; process is completed by hand Threads are not weakened during the reforming process; cold hardening leaves the thread 39% harder than those which have been cut Threads reformed with the Silbertool® withstand the same static and dynamic loads as a new undamaged thread, with a higher fatigue endurance limit The finished surface is smoother than if cut which reduces the chance of corrosion and improves thread lifespan Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately See spare parts below for compatible Roller Packs.

Read more less

Suitable for M10-M36 threads Our new range of External Thread Reform Tools use innovative non-cutting technology to return threads back to their original shape Allows original parts to be reused rather than replaced Works on all types of thread including metric, fine and imperial with compatible rollers No external energy source is required; process is completed by hand Threads arent weakened during the reforming process; cold hardening leaves the thread 39% harder than those which have been cut Threads reformed with the Silbertool® withstand the same static and dynamic loads as a new undamaged thread, with a higher fatigue endurance limit The finished surface is smoother than if cut which reduces the chance of corrosion and improves thread lifespan Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately See spare parts below for compatible Roller Packs.  

Read more less

Suitable for M10-M60 threads Our new range of External Thread Reform Tools use innovative non-cutting technology to return threads back to their original shape Allows original parts to be reused rather than replaced Works on all types of thread including metric, fine and imperial with compatible rollers No external energy source is required; process is completed by hand Threads arent weakened during the reforming process; cold hardening leaves the thread 39% harder than those which have been cut Threads reformed with the Silbertool® withstand the same static and dynamic loads as a new undamaged thread, with a higher fatigue endurance limit The finished surface is smoother than if cut which reduces the chance of corrosion and improves thread lifespan Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately See spare parts below for compatible Roller Packs.  

Read more less

Suitable for M50-M110 threads Our new range of External Thread Reform Tools use innovative non-cutting technology to return threads back to their original shape Allows original parts to be reused rather than replaced Works on all types of thread including metric, fine and imperial with compatible rollers No external energy source is required; process is completed by hand Threads arent weakened during the reforming process; cold hardening leaves the thread 39% harder than those which have been cut Threads reformed with the Silbertool® withstand the same static and dynamic loads as a new undamaged thread, with a higher fatigue endurance limit The finished surface is smoother than if cut which reduces the chance of corrosion and improves thread lifespan Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately See spare parts below for compatible Roller Packs.  

Read more less

Metric Roller Set R16-0.5mm pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-0.5mm LH pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-0.75mm pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-0.75mm LH pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-0.8mm pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-0.8mm LH pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-1.0mm pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-1.0mm LH pack of 3 For use with Silbertool 01421600   Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-1.25mm pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-1.25mm LH pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-01.5mm pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-1.5mm LH pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-1.75mm pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-1.75mm LH pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-2.0mm pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

Metric Roller Set R16-2.0mm LH pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

UNC/UNF/UNEF Roller Set R16 - 11tpi pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

UNC/UNF/UNEF Roller Set R16 - 32tpi pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

UNC/UNF/UNEF Roller Set R16 - 28tpi pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

UNC/UNF/UNEF Roller Set R16 - 24tpi pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

UNC/UNF/UNEF Roller Set R16 - 20tpi pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

UNC/UNF/UNEF Roller Set R16 - 18tpi pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

UNC/UNF/UNEF Roller Set R16 - 16tpi pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less

UNC/UNF/UNEF Roller Set R16 - 14tpi pack of 3 For use with Silbertool 01421600 Roller packs must be used with the thread reformer; other sizes are available

Read more less