Socketry

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction). It is no longer necessary to remove the lever of the steering control tie rod.   Application: MB Atego, Actros/Kässbohrer Bus   Technical data: Length: 220mm 6-side profile

Read more less

Technical data: 6-teeth - tooth width 10,9 mm Inner Ø 71,5 mm - Sq 3/4”   Application: Rear axle models: HL2/2, HL2/7, HL2/13

Read more less

Technical data: 6-teeth - tooth width 10 mm Inner Ø 77 mm - Sq 1”   Application: Front axle models: VW2 - VW4 - VW6.1 - 6.8 Suitable for MAN

Read more less

Technical data: 6-teeth - tooth width 9,8 mm Inner Ø 113 mm - ☐ 1”   Application: Axle models: NS4/2 - NS4/10 Sprocket axle models: HL6/1, HL6/2, HL6/3, HD6/3

Read more less

Technical data: 6-teeth - tooth width 13 mm Inner Ø 76,5 mm -  Sq 3/4”   Application: Front axle models: M3 - ME - MI Rear axle modelswith outer planetary unit: 3MR - 5MR Suitable for MAN

Read more less

Technical data: Hexagon 160 mm -  Sq 1”   Application: Suitable for FONTENAC RENAULT

Read more less

Technical data: Hexagon 140 mm - Sq 1”   Application: Suitable for S.A.F.

Read more less

Technical data: Polygon 85 mm Inner Ø 83 mm - Sq 1”   Application: Suitable for IVECO

Read more less

Technical data: 6-teeth - tooth width 11,5 mm Inner Ø 117 mm -  Sq 1”   Application: Rear axle models: TGA Suitable for MERCEDES, MAN

Read more less

Technical data: 6-teeth - tooth width 8 mm Inner Ø 92,5 mm - Sq 1” Application: Front axle models: TGA V9 - 82L - 01 Suitable for MAN

Read more less

Technical data: 6-teeth - tooth width 7,5 mm Inner Ø 101 mm - Sq 1” Application: Suitable for MERCEDES ATEGO

Read more less

Technical data: Octagon 127 mm Ø 126 mm  Application: Suitable for R.O.R.

Read more less

Technical data: 12-teeth - tooth width 8 mm Inner Ø 90 mm - Sq 1”   Application: BRG year 2001 Suitable for MERCEDES ACTROS 1840

Read more less

Technical data: 6-teeth - tooth width 10 mm Inner Ø 75 mm - Sq 3/4”   Application Rear axle models: HL2/14, HL2/30, KL2/16, KL4/1, KL4/16, KL4/17, KL4/23, KL4/28, KL4/29, KL4/4, KL4/8, KD4/6G, HO4/2, HO4/18, NR4/4   Front axle models: AL3/1, AL3/2, AL3/3, AL3/4, AL3/7, AL3/8

Read more less

Technical data: 4-teeth - tooth width 7,6 mm Inner Ø 91 mm - Sq 1”   Application: Rear axle Suitable for SCANIA

Read more less

Technical data; Octagon 84 mm Ø 83 mm   Application: Suitable for R.O.R.

Read more less

Technical data: Ø 123 mm Hexagon 110 mm   Application: Suitable for FRUEHAUF

Read more less

Technical data: 56x71 mm - Sq  1”   Application: Axle models KÄSSBOHRER/SETRA: front axle 6,5 and 7,5t of type S 210 and 215, SG 219-221 and dead axle types S 216 HDS and S 228 DT types 0303, 0305-G and 0307 Axle models DAF, Mercedes: VL 3/8, 4/7, 4/9, 4/15, VD 4/14, of type 363, 385, 387, 389, 391, 393, 395, 617, 620, 621, 622, 623, 625, 649 Axle models Mercedes - Bus: VO 3/10, 4/11, 4/13 and 4/19 of type 0303, 0305-G and 0307

Read more less

Technical data: 60x76 mm - Sq 1”   Application: Front axle models: SK VL5/1 D9-2629 in 6x4. 2635 in 6x4. 3535K 8x4 Suitable for MERCEDES, MAN

Read more less

Technical data: Inner Ø 90 mm - Sq 1”   Application: Suitable for BPW 9TN

Read more less

Technical data: Inner Ø 74 mm - Sq 1”   Application: Suitable for BPW 12TN

Read more less

Technical data: Hexagonal nut 95 mm - Sq 1”   Application: Rear axle Trailer axle Axle with compact bearings

Read more less

Technical data: 6-teeth - tooth width 10 mm Inner Ø 110 mm - Sq 1”   Applications: Low-platform bus with gantry axle HDNP-1300 Suitable for MAN AUTOBUS

Read more less

Technical data: CH. Ø 77 mm - Sq 1"

Read more less

Technical data: CH. 80 mm - depth 23 mm - Sq 1”   Application: Suitable for RENAULT BUS, EUROCARGO, EUROTECH

Read more less

Technical data: CH. 80 mm - depth 16 mm - Sq 1”   Application: Suitable for RENAULT

Read more less

Technical data: CH. 95 mm - depth 28 mm - Sq 1”   Application: Suitable for RENAULT, VOLVO, FIAT

Read more less

Technical data: CH. 115,7 mm - depth 45 mm - Sq 1"   Application: Suitable for RENAULT

Read more less

Technical data: CH. 105,4 mm - depth 38 mm - Sq 1”   Application: Suitable for RENAULT, VOLVO, FIAT, DAF

Read more less

Technical data: CH. 105 mm - H. 57 mm - Sq 1”   Application: Suitable for RENAULT

Read more less

Technical data: CH. 105 mm - Sq 1”   Application: Suitable for IRISBUS, VOLVO

Read more less

Technical data: CH. 90 mm - Sq 1”   Application: Suitable for IVECO

Read more less

Technical data: CH. 41 mm  Octagonal 80,5mm   Application: Suitable for SCANIA

Read more less

They allow for the assembly/disassembly of the brake caliper fixing screws when working on the braking system. Used mainly on the front and rear axles of heavy vehicles. Even the most stubborn screws are released with the blow of a hammer on the end of the wrench. All wrenches are equipped with a ¾" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions. It is no longer necessary to remove the lever of the steering control tie rod.  Application: MB Atego, Actros/Kässbohrer Bus  Technical data: Length: 220mm 6-side profile

Read more less

Loosen the nut of the rear reduction hypoid axle Rear axle models: HL0/3 - HL0/6 - HL0/7 - HL1/2 - HL1/3 - HL1/8 - HL1/9 - HL2/2 - HL2/3 - HL2/5 HL2/9 - HL2/11 - HL2/12 - HL2/15 Specific for MERCEDES SPRINTER - 412T - VW - LT Dimensions: 6 teeth - tooth width 7.5 mm - inner Ø 63 mm

Read more less