Battery Care

Detect, analyze, charge and maintain all types of lead-acid (AGM, MF, EFB, WET) and Lithium LiFePO4 batteries with this multifunction battery support unit. Features a backlit LCD display, copper cables and fully insulated professional clamps. Safety features include over-voltage and over-current protection, power down alarm, short circuit protection, reverse polarity protection, high temperature alarm during charging process.   893035SP 893150SP Input Output Voltage Input Power Max Supply Current Continuous Supply Current Cable length Compatible with 200-240V AC (50-60 Hz) 12/24V 1000W 35A 35A 3m (optional upgrade : 5 meter) Lead-acid batteries 4-700Ah 200-240V AC (50-60 Hz) 12V 1400W 150A (3 minutes) 120A 3m (optional upgrade : 5 meter) Lead-acid batteries 20-2000Ah CHARGE MODEThe Charge mode can be used to recharge and automatically recondition batteries of all types and sizes including LiFePo4. The automatic reconditioning program will bring life back into old and used batteries extending their life. During charging the percentage of charge is displayed on the screen as well as the charging current. DIAGNOSTIC MODE In Diagnostic mode the output voltage of the chargers is selectable so that it can be tuned to the requirements of a vehicle. Once supplied with power the vehicle’s onboard computers can be tested and re-programmed in a safe and stable environment. This is a critical requirement of modern vehicles with sensitive and expensive onboard electronics. SHOWROOM MODE In Showroom mode the charger will supply the vehicle with all of the power required while it is in demonstration mode. This allows lights, electronic systems and auxiliaries to run continuously while the vehicle is being presented to potential customers without deeply discharging or damaging the vehicles starting battery. The charger can be hidden under the vehicle out of sight. TEST MODE The Charger is able to test both the battery and the starting system of a vehicle. The starting system test will indicate the lowest voltage in the system during cranking as well as displaying the waveform graphically. Both tests can help to rapidly identify any potential issues with a vehicle quickly and without requiring any additional equipment.

Read more less

12/24V Battery charger with automatic voltage detection and charging current up to 7A Designed to charge, maintain and recover all types of  lead-acid batteries  up to 150Ah  (12V) / 75Ah (24V) prolonging their lifetime. The intelligent charging process allows the charger to be left permanently and safely connected to a battery to provide continuous maintenance once charged. The charger comes with three charging accessories: clamps, eyelets and 12v auxillary connector. An easy to read display with LED's shows the charging status in % as well as the selected mode. Operating Modes CHARGE: designed to quickly and safely charge lead-acid batteries. BOOST 16.0V (Reconditioning): Allows the recovery of deeply discharged and sulfated 12V batteries. SUPPLY: Maintains stable voltage while the vehicle battery is being replaced, during diagnostic operations or to supply power to a showroom vehicle. COLD / AGM: designed for charging AGM batteries and other types of batteries at low temperatures  Specifications Charging capacity: 14-150Ah (12V) / 14-75Ah (24V) Maintenance capacity: Up to 225Ah Cable Length: 180 cm Dimensions: 206 x 88.5 x 52 mm Weight: 0.7 Kg  

Read more less

Detect, analyze, charge and maintain all types of lead-acid (AGM, MF, EFB, WET) and Lithium LiFePO4 batteries with this multifunction battery support unit. Features a backlit LCD display, copper cables and fully insulated professional clamps. Safety features include over-voltage and over-current protection, power down alarm, short circuit protection, reverse polarity protection, high temperature alarm during charging process.   893035SP 893150SP Input Output Voltage Input Power Max Supply Current Continuous Supply Current Cable length Compatible with 200-240V AC (50-60 Hz) 12/24V 1000W 35A 35A 3m (optional upgrade : 5 meter) Lead-acid batteries 4-700Ah 200-240V AC (50-60 Hz) 12V 1400W 150A (3 minutes) 120A 3m (optional upgrade : 5 meter) Lead-acid batteries 20-2000Ah CHARGE MODEThe Charge mode can be used to recharge and automatically recondition batteries of all types and sizes including LiFePo4. The automatic reconditioning program will bring life back into old and used batteries extending their life. During charging the percentage of charge is displayed on the screen as well as the charging current. DIAGNOSTIC MODE In Diagnostic mode the output voltage of the chargers is selectable so that it can be tuned to the requirements of a vehicle. Once supplied with power the vehicle’s onboard computers can be tested and re-programmed in a safe and stable environment. This is a critical requirement of modern vehicles with sensitive and expensive onboard electronics. SHOWROOM MODE In Showroom mode the charger will supply the vehicle with all of the power required while it is in demonstration mode. This allows lights, electronic systems and auxiliaries to run continuously while the vehicle is being presented to potential customers without deeply discharging or damaging the vehicles starting battery. The charger can be hidden under the vehicle out of sight. TEST MODE The Charger is able to test both the battery and the starting system of a vehicle. The starting system test will indicate the lowest voltage in the system during cranking as well as displaying the waveform graphically. Both tests can help to rapidly identify any potential issues with a vehicle quickly and without requiring any additional equipment.

Read more less

Giga Lithium Battery Booster Jump Starter Pack 12 Volt The lithium booster is a powerful and ultra-light booster for professional use - The GIGALITHIUM booster is suitable for difficult to start vehicles but can also be used to protect/remember the memory of vehicles. Thanks to the memory saver in the booster, the memory of the car such as codes and the clock remains present during a possible battery change. The GIGALITHIUM Jump Starter 12V booster can handle all 12V motor sizes and with up to 25 starts on a charge, it’s the ideal booster for auto repair shops, auto transport, roadside assistance in need of start-up assistance.Longer life span, no maintenance, extremely safe, lightweight, improved discharge and charge efficiency. Specification: Operating Voltage: 12V Cranking Amps: 800A Cable Length: 50cm Cable Size: 10mm Automatic Charger: 14.5V Battery Type 2 Pack Lithium: 1.3A Reverse Polarity Protection. Short Circuit Protection. Overvoltage Protection. Memory Saver. Dimensions: 445 x 250  115 Weight: 3 Kg  

Read more less

Giga Lithium Battery Booster Jump Starter Pack 12/24 Volt The lithium booster is a powerful and ultra-light booster for professional use - The GIGALITHIUM booster is suitable for difficult starting vehicles to start but can also be used to protect/remember the memory of vehicles. Thanks to the memory saver in the booster, the memory of the car such as codes and the clock remains present during a possible the battery change. GIGALITHIUM in 12/24V is one of the most powerful boosters in the range. Suited for cars, vans, or any other 12V vehicle. But also your first aid for all 24V vehicles like trucks etc.Longer life span, no maintenance, extremely safe, lightweight, improved discharge and charge efficiency.Specification: Operating Voltage: 12/24V Continuous Current: 2000/1000A Start Max Ampertage: 5000/2500A Peak Amp: 10000/5000A Clamp Output: 1000A Cable Length: 160cm Cable Size: 25mm Maximum Charge Voltage: 14.5V Automatic Battery Charger: 14.5V Battery Type 2 Pack Lithium: LiFePo4 Reverse Polarity Protection. Short Circuit Protection. Overvoltage Protection. Memory Saver. Dimensions: 350 x 240 x 140 Weight: 5 Kg

Read more less

12/24V Battery charger with automatic voltage detection and charging current up to 25A Designed to charge, maintain and recover all types of  lead-acid batteries  up to 450Ah prolonging their lifetime. The intelligent charging process allows the charger to be left permanently and safely connected to a battery to provide continuous maintenance once charged. The charger comes with two charging accessories: clamps & eyelets. An easy to read display with LED's shows the charging status in % as well as the selected mode. Operating Modes CHARGE: Designed to quickly and safely charge lead-acid batteries with capacity higher than 50Ah. BOOST 16.0v (Reconditioning): Allows the recovery of deeply discharged and sulfated 12V batteries. SUPPLY: Maintains stable voltage while the vehicle battery is being replaced, during diagnostic operations or to supply power to a showroom vehicle. COLD / AGM: designed for charging AGM batteries and other types of batteries at low temperatures  Specifications Charging capacity: 50-450Ah (12V) / 25-230Ah (24V) Maintenance capacity: Up to 500Ah Cable Length: 187 cm Dimensions: 29 x 12 x 7 cm Weight: 2.2 Kg  

Read more less

6/12V Battery charger with automatic voltage detection and charging current up to 3.8A Designed to charge and maintain and recover all types of  lead-acid batteries  up to 75Ah prolonging their lifetime. The intelligent charging process allows the charger to be left permanently and safely connected to a battery to provide continuous maintenance once charged. The charger comes with three charging accessories: clamps, eyelets and cigarette lighter connector. An easy to read display with LED's shows the charging status in % as well as the selected mode. Operating Modes 6V: to quickly and safely charge 6V lead-acid batteries. MOTO: for small 12V batteries up to 14Ah CAR: for 12V batteries larger than 14Ah COLD / AGM: designed for charging AGM batteries and other types of batteries at low temperatures  Specifications Charging capacity: 1.2-14Ah (6V) / 1.2-75Ah (12V) Maintenance capacity: Up to 120Ah Cable Length: 180 cm Dimensions: 175 x 65 x 43.5 mm Weight: 0.46 Kg  

Read more less

6/12V Battery charger with automatic voltage detection and charging current up to 1.1A Designed to charge and maintain most types of 6V and 12V lead acid batteries (SLA, WET, GEL, AGM) The intelligent charging process allows the charger to be left permanently and safely connected to a battery to provide continuous maintenance once charged. The charger comes with three charging accessories: clamps, eyelets and 12v auxillary connector. An easy to read display with LED's shows the charging status in % as well as the selected mode.  Selectable Modes 6V Lead-acid batteries 12V Lead-acid batteries 12V Lithium-ion batteries  Specifications Input: 220-240V AC - 50/60Hz Power: 30W Battery capacity: 2.2-40Ah (6V) / 2.2-40Ah (12V) Cable Length: 180 cm Dimensions: 153 x 59 x 38 mm Weight: 0.35 Kg  

Read more less

25 amp electronic charger with digital display Suitable for all types of lead batteries; Wet, Gel, AGM, MF, VRLA, etc. Technical Specifications Power Supply - 220 - 240V Frequency - 50-60H Rated Current - 5 - 12.5 - 25A Charging / Testing Stages - 9 Battery Voltage - 12 - 24V Capacity - 5Ah - 550Ah Show Room Function - 13.8V IP Rating - IP20 Size - 260 x 130 x 75mm Weight - 2.5Kg  

Read more less

Battery Tester: tests 6V-12V batteries and 12V-24V volt charging & starting systems Digital screen with integrated printer Bad connection warning Operating range: 40-2000 CCA Tests EFB, VRLA / GEL, AGM Flat Plate, AGM Spiral and regular liquid batteries in seconds Rating system: SAE (CCA) / DIN / EN / IEC & JIS

Read more less