
EV Equipment & Tools
08043000 - Rear Ride Height Torque Tool - tesla Model 3 & Y
The Sykes Pickavant 08043000 Ride Height Setting Tool is specifically designed for the Telsa Model 3 and Model Y vehicles. This essential setup tool is used to accurately position the rear lower suspension arm at its correct initial ride height, ensuring proper suspension geometry and vehicle handling. Whether you're replacing lower suspension arms, hubs, springs, or related components, this tool is a must-have for achieving OEM-level accuracy during reassembly. It ensures the lower control arm is held at the correct height, with a precise alignment that occurs when the top of the tool contacts the sub-frame and the lower control arm rests on the base of the tool. Applications: Tesla Model 3 Tesla Model Y OEM Manufactured to match OEM reference 1137855-00-A for accurate compatibility.
08046000 - Front Upper Control Arm Ride Height Gauge - Tesla Model 3 & Y
The Sykes Pickavant 08046000 is used to accurately set the initial ride height position of the front upper suspension control arm on Tesla Model 3 and Model Y vehicles. It is a required tool when replacing the front upper suspension arms, ensuring proper geometry and alignment during reassembly. Applications: Tesla Model 3 Tesla Model Y OEM Ref: Compatible with Tesla OEM part reference 1450399-00-A
33158100 - Cooling Cap Tesla Model 3 & Y
Cap Adaptor - Tesla Model 3 & Y Inside cap diameter: 39mm Applications: Tesla Model 3 Model Y The 315 series Cooling System Pressure Test programme from Sykes-Pickavant provides extensive coverage for both popular and less popular models and is constantly updated as new models are released. More than 20 specialist cooling system cap adaptors are available All components of the 315 range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors For older systems with a threaded connection, an adaptor is available (03186870) Sykes-Pickavant is constantly updating the range of cap adaptors available as new models are released. Please contact Customer Services on 01543 679900 for further details.
33158200 - Cooling Cap Tesla Model S & X
Cap Adaptor - Tesla Model S & X Inside cap diameter: 47mm Applications Tesla Model S Model X The 315 series Cooling System Pressure Test programme from Sykes-Pickavant provides extensive coverage for both popular and less popular models and is constantly updated as new models are released. More than 20 specialist cooling system cap adaptors are available All components of the 315 range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors For older systems with a threaded connection, an adaptor is available ((03186870) Sykes-Pickavant is constantly updating the range of cap adaptors available as new models are released. Please contact Customer Services on 01543 679900 for further details.
33158500 - Cooling Cap Hyundai / Kia
Cap Adaptor - Hyundai / Kia Applications: Hyundai Elantra (2021-2024) Genesis (2021-2023) i30 (2017-2021) Ioniq (2017-2022) Ioniq 5 (2022-2024) Ioniq 6 (2024) ix35 (2013-2015) Kona (2018-2023) Santa Fe (2021-2023) Sonata (2020-2023) Tucson (2015-2023) Velostar (2015-2023) Kia Carnival (2022-2024) EV6 (2022-2024) K5 (2021-2024) Niro (2017-2024) Picanto (2017-2024) Seltos (2021-2024) Sorento (2021-2023) Soul (2020-2024) Sportage (2017-2024) The 315 series Cooling System Pressure Test programme from Sykes-Pickavant provides extensive coverage for both popular and less popular models and is constantly updated as new models are released. More than 20 specialist cooling system cap adaptors are available All components of the 315 range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors For older systems with a threaded connection, an adaptor is available (03186870) Sykes-Pickavant is constantly updating the range of cap adaptors available as new models are released. Please contact Customer Services on 01543 679900 for further details.
34313000 - Automatic Brake Pro Bleeder - Portable 20L
The Sykes Pickavant Brake Pro Professional Brake Bleeder (20L) is a powerful solution for fast and efficient brake and clutch bleeding. Compact yet capable, this unit is ideal for both workshop and mobile applications. Key Features: Adjustable Bleeding Pressure: Easily set bleeding pressure from 0.5 to 4.5 bar (7-65 psi) for optimal control across a range of vehicles Dual Power Operation: Operates via a 12V battery or an optional mains adaptor P/N 34313200, offering maximum flexibility on the move or in the workshop Colour LCD Control Panel: Features a vibrant LCS Screen and intuitive 4 button touch panel for easy set up and monitoring Safety Assured: Includes automatic shut off when: Fluid level is low Abnormal pressure is detected System is paused (auto stop mode) Multilingual Interface: Supports 5 languages making it suitable for global workshops Versatile Fluid Handling: Flushes, bleeds, and switches between different DOT fluid types with a replaceable drum/can system Large 20L Tank Capacity (Tank Not Included): Designed to accommodate a 20L container, making it ideal for frequent use without constant refilling — perfect for busy garages and mobile mechanics Includes SP Euro Cap: SP Euro cap, angled screw type covers a wide range of applications Extensive cap range available: Specific application brake caps are also available here Brake Bleeding Caps Technical Specifications: Capacity: 20 Litres Operating Pressure Range: 0.5-4.5 Bar (7-65 psi) Power Supply: 12V battery or mains* (*with optional lead P/N 34313200) Hose Length: 5 metres Weight 25.7 Kg Dimensions 62 x 62.5 x 58 cm Also available as a 60L version with a trolley, **some images shown are the 60L version P/N 34313500 - Automatic Brake Pro Bleeder - 60L with Trolley
34313500 - Automatic Brake Pro Bleeder - 60L with Trolley
The Sykes Pickavant Brake Pro Professional Brake Bleeder (20L) is a powerful solution for fast and efficient brake and clutch bleeding. Compact yet capable, this unit is ideal for both workshop and mobile applications. Key Features: Adjustable Bleeding Pressure: Easily set bleeding pressure from 0.5 to 4.5 bar (7-65 psi) for optimal control across a range of vehicles Dual Power Operation: Operates via a 12V battery or an optional mains adaptor P/N 34313200, offering maximum flexibility on the move or in the workshop Colour LCD Control Panel: Features a vibrant LCS Screen and intuitive 4 button touch panel for easy set up and monitoring Safety Assured: Includes automatic shut off when: Fluid level is low Abnormal pressure is detected System is paused (auto stop mode) Multilingual Interface: Supports 5 languages making it suitable for global workshops Versatile Fluid Handling: Flushes, bleeds, and switches between different DOT fluid types with a replaceable drum/can system Large 60L Tank Capacity (Tank Not Included): Designed to accommodate a 60L tank, making it ideal for frequent use without constant refilling — perfect for busy garages and mobile mechanics Includes SP Euro Cap: SP Euro cap, angled screw type covers a wide range of applications Extensive cap range available: Specific application brake caps are also available here Brake Bleeding Caps Includes retrieving bottle for old fluid with nipple adapter and chain Technical Specifications: Capacity: 60 Litres Operating Pressure Range: 0.5-4.5 Bar (7-65 psi) Power Supply: 12V battery or mains* (*with optional lead P/N 34313200) Hose Length: 5 metres Weight 50.2Kg Dimensions 62 x 62.5 x 137cm
34302800 - Tesla Model S & X Brake Bleeder Cap
The '343' range of brake bleeder caps are compatible with both older & newer Sykes Pickavant electric brake bleeders: 03580000, 34300100, 343001V2, 34400500, 34313000 & 34313500. Applications: Tesla Model S & X
34302900 - Tesla Model 3 & Y Brake Bleeder Cap
The '343' range of brake bleeder caps are compatible with both older & newer Sykes Pickavant electric brake bleeders: 03580000, 34300100, 343001V2, 34400500, 34313000 & 34313500. Applications: Tesla Model 3 & Y
92971000 - Comprehensive Hybrid Battery Maintenance Table
The Comprehensive Hybrid Battery Maintenance Table is part of a new range of battery maintenance tables designed to meet the needs of removing electric batteries from vehicles in a safe and secure manner.Batteries are usually heavy and irregular in design but generally have one flat surface which makes them easy to secure.The Comprehensive Hybrid Battery Maintenance Table has full tilting capacity with three locking positions and includes 4 x tall pins, 4 x rising plates and 4 x sets of pegs in 4 sizes (4 pegs per set). Unique hole feature covers a wide range of batteries in all shapes and sizes Aids safe removal and transportation in the workshop Provides a stable platform for maintenance and repair activities and also tilts to allow for bleeding of the battery if required Four central lifting pads allow for the battery to be removed safely without technicians hands being trapped underneath, with easy lowering fully onto the table The central pads also allow for a smooth installation of the battery back into the vehicle Hole design with peg system secures the battery to the table for transportation in the workshop and for holding the battery in place during tilting A range of peg sets are available to customise the table for the batteries size and shape The tilting mechanism also allows for space saving storage when the table is not in use The hybrid battery table can be mounted onto an existing hydraulic table, otherwise it can be supplied as part of the package The table can also be used for engine / gearbox removal as well as battery maintenance UK Patent pending
92971200 - Basic Hybrid Battery Maintenance Table
The Basic Hybrid Battery Maintenance Table is part of a new range of battery maintenance tables designed to meet the needs of removing electric batteries from vehicles in a safe and secure manner.Batteries are usually heavy and irregular in design but generally have one flat surface which makes them easy to secure.The Basic Hybrid Battery Maintenance Table is locked in a flat position and includes 4 x tall pins. Unique hole feature covers a wide range of batteries in all shapes and sizes Aids safe removal and transportation in the workshop Provides a stable platform for maintenance and repair activities Hole design with peg system secures the battery to the table for transportation in the workshop A range of peg sets are available to customise the table for the batteries size and shape The hybrid battery table can be mounted onto an existing hydraulic table, otherwise it can be supplied as part of the package The table can also be used for engine / gearbox removal as well as battery maintenance
GO1000B - EV Battery & Transmission Lifting Table 1000kg
Universal lifting table with a load capacity of 1000kg (1T) Aside from lifting electric-car batteries, this product is also perfect for lifting and moving engines, automatic gearboxes, chassis components Features: Powered by compressed air. Sliding cover, allowing convenient battery installation or removal. High ground clearance makes it compatible with all workshop cranes on the market. Extendable and tiltable top table, by means of a mechanical screw Easy to operate and tilt with self explanatory operations. The table features holes with M10 thread, which can be used to mount all types of supports or accessories, including special hooks, brackets, and protective mats for battery packs. Button operated table lowering Rack safety system, when not being operated, the table locks by means of a mechanical anti-lowering safety wedge. Opening Table (1/3 420mm) Extendable Table - Tilting Table (±3°) Shifting Table - Extendable Handle - Fork Housing - Max Capacity 1000 KG Time To Go Up 80 s (no load) / 100 s (full load) Time To Go Down 60 s (no load) / 20 s (full load) Power Supply 6/8 bar Full range of Govoni available - click to see the Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025
GO1500T - EV Battery & Transmission Lifting Table 1500kg
Universal lifting table with a load capacity of 1500kg (1.5T) Aside from lifting electric-car batteries, this product is also perfect for lifting and moving engines, automatic gearboxes, chassis components Features: Powered by compressed air. Sliding cover, allowing convenient battery installation or removal. High ground clearance makes it compatible with all workshop cranes on the market. Extendable and tiltable top table, by means of a mechanical screw Table top can be moved laterally up to 30mm to allow repositioning under the vehicle. Easy to operate and tilt with self explanatory operations. The table features holes with M8 thread, which can be used to mount all types of supports or accessories, including special hooks, brackets, and protective mats for battery packs. Button operated table lowering Rack safety system, when not being operated, the table locks by means of a mechanical anti-lowering safety wedge. Specifications Opening Table - Extendable Table (200mm) Tilting Table (±3°) Shifting Table (±30mm) Extendable Handle (225mm) Max Capacity 1500 KG Time To Go Up 80 s (no load) / 150 s (full load) Time To Go Down 70 s (no load) / 15 s (full load) Power Supply 6/8 bar Full range of Govoni available - click to see the Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025
GO2000TR-E - Mobile Lifting Table - 2000Kg Electro Hydraulic
Wheeled Mobile lift, with a capacity of 2000 kg, and an opening, adjustable and oscillating lifting surface, which allows easy access under the vehicle for dismantling battery packs, engines, and transmissions. The upper platform is equipped with M8 threaded holes, for fixing the battery, engine and gearbox support kits. The new GO2000TR-E is provided with a control unit integrated into the base, allowing you to choose the desired height via a mobile button panel equipped with a magnet. This allows to raise and lower the platform in a safe and precise way and precise management of the fixing points of the battery or other mechanical components, such as engines and gearboxes. Thanks to its high lifting capacity, it can be used for truck and commercial vehicle battery packs, as well as particularly heavy mechanical components. Thanks to the large-capacity structure and the double reinforced scissors, it guarantees lifting and weight management capacity, without balance problems. Extendable range handle (incl. 2x hand wheels for fixation) Platform extendable (extension and access to the centre) (incl. handle and 2x hand wheels for fixation) Platform laterally adjustable by 40 mm (access for adjustment from left and right without the need to move the table out from the vehicle underbody) Inclination of the platform ±2° adjustable (compensation to lifting platform/floor inclination) Platform with threaded housings for support adapters or special solutions Lifting and lowering by electro-hydraulic pump with remote control system Technical Data: Extendable Table 200 mm Tilting Table ± 2° Shifting Table ± 40mm Extendable Range Handle 200mm Max. capacity Max 2000 kg Lifting time 38 s (no load) / 42 s ( full load) Lowering time 90 s (no load) / 20 s (full load) Power supply 380 Volt Three-phase motor 1,1 Kw Full range of Govoni available - click to see the Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025
GO1501 - Spacer Kit For Lifting Tables M10 (15pcs)
15 Piece Spacer Kit for use with EV & Transmission Lifting Tables GO1000B / GO1500B Spacers can used to raise the battery or transmission off the table to allow access to the underneath for removing bolts etc. Allow you to avoid battery contact with the metal table and so prevents arcing. Allow for easy access for straps to lift the battery off the table when full battery replacement is required Thread size - M10 Full range of Govoni available click to see the Govoni Catalogues
GO1503 - Battery Lifting Accessory Kit
Required to hold battery pack, engine or transmission on the platform, safely. The components fit perfectly to the different types of batteries, taking into consideration the possible specifications of the manufacturer. Slotted holes in the foot allow easy changing/moving of the platform. The support columns are height-adjustable and have a thread for screwing the rubbers/spacers. Used for platforms with M8 and M10 threaded holes. Specifications: Support foot length: 200 mm Minimum height: 215 mm Maximum height: 315 mm Usable key for upper pin: SW32 mm Threads used for top fixing: M8 Maximum capacity for each support: 100 Kg Fixing screw: M8 Fixing screw: M10 Full range of Govoni available - click to see the Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025
GO1504 - Spacer Kit For Lifting Tables M8 (15pcs)
15 Piece Spacer Kit for use with EV & Transmission Lifting Tables GO1000B / GO1500B / GO1500T Spacers can used to raise the battery or transmission off the table to allow access to the underneath for removing bolts etc. Allow you to avoid battery contact with the metal table and so prevents arcing. Allow for easy access for straps to lift the battery off the table when full battery replacement is required Thread size - M8 Full range of Govoni available click to see the Govoni Catalogues
92975000 - EV Battery Lifting Hoist
The 92975000 EV Battery Lifting Hoist is a robust lifting solution engineered to assist workshops in safely lifting and positioning electric vehicle and hybrid batteries. Designed to work with standard engine cranes, this hoist is ideally paired with Sykes‑Pickavant EV battery lifting tables or similar workshop lifting platforms. Key Features Strong Lifting Capacity: Supports up to 1.5 tonnes (1500 kg), suitable for most EV and hybrid battery packs. Adjustable Lift Height: extends from 650 mm to 2250 mm, to accommodate various vehicle heights and workshop layouts. Engine Crane Compatible: designed for use with standard workshop cranes for easy integration. Compact Frame Design: lightweight and portable yet engineered for safety and stability. Applications Ideal for EV and hybrid battery handling: use alone or in combination with a battery lifter or maintenance table. Perfect pairing with Sykes‑Pickavant and Govoni battery tables. Versatile utility: can also be adapted for moving heavy transmissions, engines, and other workshop components. Technical Specifications Max capacity: 1,500 Kg (1.5 Tonnes) Lift Height Range: 650 mm to 2250 mm Lifting Method: Crane mounted frame Compatiblity: Standard engine cranes With the 92975000 EV Battery Lifting Hoist, workshops gain a dependable and flexible tool to manage heavy battery packs safely and efficiently. Its high capacity, broad height range, and compatibility with existing lifting tables make it a smart addition to any EV or hybrid service environment.
385801SP - Pneumatic Coil Spring Compressor Workstation
Pneumatic Coil Spring Compressor Workstation with Upper Bracket Universal piece of equipment for assembling and disassembling struts and coil springs - suitable for Cars, 4WDs and LCV's Automatic jaw levelling pivots to compensate and hold all coil springs including left hand coils Safety switch prevents operation when gates are open Interchangeable jaws / vice to suit different springs Up to 2452kg of force (at 8 bar) at the touch of a pedal Full height steel safety gates Top arms and jaws adjust and lock to secure spring Unique double depth front plate allows safe work on extra long strut assemblies 10mm floor mounting holes for insurance company compliance Safety cut-out for de-activation of cylinder when safety guard is opened ALS Auto Levelling System - Auto levelling upper arms simplify working on conical and misaligned springsBrackets System - Front and side spring clamps designed for fast changeover using unique Brackets SystemAluminium Cylinder Can be used on extra-long shock absorbers (e.g. commercials) due to the long (330mm) stroke of the cylinder. Manufactured from light alloy and resin to eliminate risk of corrosion and internal parts failure Contents: Safety Guards Bracket A: 78 “ 130mm (38481200) Bracket C: 105 - 182mm (38481400) Strut Vice (GO332) Upper Top Mount Bracket (GO338) Specifications: Dimensions: 1600 x 520 x 300mm Max Working Pressure: 8 bar (116 psi) Compression Force: 2452 kg (24500N) Cylinder Stroke: 330mm CE approved Fitted with Extra Heavy Duty Pneumatic Cylinder - Ideal for Extra Heavy Duty applications i.e. SUVs, 4WDs etc where full spring compression is required Also Includes: GO338- Upper Bracket for Spring Compressor The design is ideal for; Springs with a small number of coils; meaning that one more coil can always be tensioned automatically Simplifying dismantling and assembly operations The rotatable and fixable mounting plate is provided with a universal hole division. In addition, the holder between the arms can easily be tilted. Suitable for use with Sykes-Pickavant Coil Spring Compressors. click on the link below for more information. GO338 - Upper Top Mount Bracket for Spring Compressor – Sykes Pickavant 385801SP Spare Part Break Down Full Range of Service Packs also Available Call our Customer Services team on 01543 679900 to find out more
33158400 - Cooling Cap BYD
Cap Adaptor - Suitable for Recent BYD models including hybrid & battery vehicles. The 315 series Cooling System Pressure Test programme from Sykes-Pickavant provides extensive coverage for both popular and less popular models and is constantly updated as new models are released. More than 20 specialist cooling system cap adaptors are available All components of the 315 range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors For older systems with a threaded connection, an adaptor is available (03186870) Sykes-Pickavant is constantly updating the range of cap adaptors available as new models are released. Please contact Customer Services on 01543 679900 for further details.
