Clearance

Flojet pump suitable for use with brake bleeders. Model: D32X010BR Voltage: 24 V DC Open Flow Rate: 1.6 GPM (6.1 LPM) Max Current Draw: 3.5 Amps Max Pressure: 50 PSI (3.5bar) Fuse (not included): 5 Amps Required THERMALLY PROTECTED

Read more less

EX DEMO UNIT  RRP £257.45 CLEARANCE £99.00 SUPERFICIAL DAMAGE TO BOX AND UNIT, WHICH DOES NOT AFFECT THE TOOL.   Successful removal of troublesome inner bearing race and reinstallation of complete bearing assembly TIME SAVING TOOL - NO CUTTING OF BEARING REQUIRED For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press Removes and installs bearings on both 5 and 6 stud hubs Removes the inner and outer bearing race Contents include:- Hub support for new bearing installation- 5 x supporting pillars and stand for bearing removal- 2 x adaptors for insertion and removal- Special separator for inner ring removal

Read more less

EX DEMO UNIT 1 Piece missing, used but threads still good.     Screw Extractor Set (5 Piece) Spiral LH screw extractors (easy-outs) 3 - 19mm capacity Supplied in plastic case

Read more less

EX DEMO UNIT  RRP £1995 this is a used item, however it is in excellent condition with no signs of damage.   Without disconnecting hoses, coolant is easily changed by inserting a conical adapter into reservoir tank.  The coolant exchange job can be done by deep vacuum within 5 minutes, instead of half hour taken in hose disconnecting and restoring job. Also, this vacuum exchange process can avoid air pockets to save air purge time after coolant exchange. The oil receiving pan is optional, for some vehicles that do not have straight-in reservoir tank design (cannot utilize conical adapter to do coolant exchange through reservoir tank), thus coolant exchange by gravity can be effected. The machine is not only efficient and time saving equipment, but also helps keep your garage floor clean, avoid ground pollution caused by coolant dripping during hose disconnection which can be caused by other coolant exchange methods.  Features Dual-manual valve design, easy operation Directly connect shop air, zero failure Whole work process visible through fibre glass tanks Support off/on-vehicle exchange Large coverage adaptors (covering more than 90% vehicles on the market) Includes 4 x Cooling System Flush Fluids (FCF)  Specification • New and used fluid capacity: 15L• Pressure gauge: -1-5 bar• Max. work pressure: 3 bar• Length of return/out hose: 3m  Functions • Used fluid extraction Vacuum• Add new fluid• Empty new/used fluid tank

Read more less

EX DEMO TORQUE WRENCH RRP £199 CLEARANCE £85.00 COMES WITH CALIBRATION CERTIFICATE 2 DATED SEPT 25, 1 DATED JAN 2025   1/2" Push thru torque wrench 60-340 Nm 50-250 lbs ft The Speedline Torque utilises Speedlines proven mechanism and internal components and incorporates them into a purposeful and attractive torque wrench that will delight a wide range of users from professional mechanics to hobby enthusiasts Accurate to ±3% of reading which meets and exceeds ISO6789:2003 Light and fast adjustment saves operator time and effort Micrometer scale applying to the primary torque units (N.m on a dual scale wrench) for simple and error free setting Push through ratchets allow torque control in both the clockwise and anti-clockwise directions Tough ratchets with narrow engagement angles allow for easy positioning of the tool in confined spaces. 5° for models up to 200 N.m and 6° for models 300 N.m and above Pull/push lock is fast and intuitive to use and prevents accidental adjustment of the set torque Convenient hanger feature for tool storage also aids wrench unlocking and adjustment   Specifications Length - 679mm Weight - 1.55 Kg Ratchet Teeth - 60 Square Drive - 1/2" Ratchet Diameter - 52mm Scale Increments (Nm) - 1 Scale Increments (lbf-ft) - 10  

Read more less

X53400300 - Carbon Tec HHO EX DEMO UNIT  RRP £3805 CLEARANCE £895 Releases hydrogen into the combustion engines inlet system whilst running to increase internal temperature and burn off carbon build up; promoting efficient operation with a cleaner engine Portable Machine - enables use in a number of different environmentsLow Voltage Operation - works off the vehicles battery at a safe low voltage when the engine is runningEase of Use - little or no disassembly of the engine requiredLow MaintenanceFixed HHO Supply - protects against engine runawayTwo Year Warranty - full back up service available

Read more less

RRP £3164.16 Digital electronic tester for checking the analog and PWM signals of sensors and activating various types of electro-mechanical actuators. A single instrument that contains infinite functions: the test and diagnosis capabilities of SPECTRUM are so broad and diversified that there is no comparison to any other device on the market. TECHNICAL DATA Ambient temperature range 0 - 45 °C Power supply directly from the battery 9-28V dc CABLES INCLUDED IN KIT GO2101 PWM Multimeter Wiring GO2102 Ground Test Wiring GO2103 Pulse Sense Wiring GO2104 DC Volt Generator Wiring GO2105 Resistor Sensor Wiring GO2106 PWM Power Wiring Plug-Croc Clip Wiring JACK wiring  Optional lead kit available GO2120 - – Sykes Pickavant (see kit page for individual lead details) Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

EX DEMO UNIT RRP £21.95 CLEARANCE £4.95   SCHAEFFLER APPROVED Suitable for most 1.9 & 2l TDi VAG applications Suitable for M8 Fine & M8 to M10 coarse stepped studs For use on the steel timing belt tensioner mounting stud which screws into the aluminium cylinder head‹ The mounting studs are prone to seizing due to steel to aluminium corrosion bond which can occur between the stud and cylinder head due to oxidisation. When this occurs, the stud proves difficult to remove without the correct tool  When replacing the stud it must be torqued to the manufacturers recommended value, failure to do so can result in the stud working loose and releasing the timing belt tensioner or vibrating with the cyclic stress and snapping off. Either of these eventualities can lead to catastrophic engine damage

Read more less

RRP £29.95   Double ended door hing pin remover, specially designed for use on solid pins found on Ford Fiesta, Escort and Orion models. Manucfactured from high strength carbon steel Designed for access where space is limited 16mm square bar, double ended, with 7.5mm jaws   Length: 270mm Width: 16mm Jaw: 7.5mm

Read more less

RRP £9.95 Injector Socket M17 Bosch & Delphi

Read more less

X03619000 - Piston Windback tool RH Screw & Body BRAND NEW - UNUSED RRP £39.95 CLEARANCE £3.95   Piston Windback tool RH Screw & Body

Read more less

X01740000 - Diesel Injector Nozzle Cleaner BRAND NEW - UNUSED RRP £39.50 CLEARANCE £2.95   Designed to clean the sealing surface of the injector Aluminium body with 19mm flat steel cutter which is rotated over the injector nozzleto clean the nozzle seat surface Aluminium body with knurled grip, and 3/8 sq dr for ease of use 19mm Flat Cutter

Read more less

RRP £24.95   Designed to assist in the fitting of new style alternator / air-con / power steering drivebelts, which have no load adjustment mechanism, and are designed to be “stretched” intoplace. Guides the belt into the correct position, whilst turning the crankshaft pulley by hand Steel guide pins help lock the tool in situ, whilst the alloy body guides the belt over theedge of the pulley, and supports the load on the belt during the fitting process

Read more less

RRP £995   Applications: Toyota Auris ('06-) Toyota Avensis ('99-) Toyota Aygo ('05-) Toyota Corolla ('01-) Toyota Corolla Verso ('01-) Toyota IQ ('08-) Toyota Previa ('00-) Toyota Prius MK1/2 ('00-) Toyota RAV4 ('01-) Toyota Urban Cruiser ('08-) Toyota Verso ('09-) Toyota Yaris / Verso ('99-) Toyota Lexus IS ('05-) Engine Codes: 1.0/VVT-I -1SZ-FE, 1KR-FE,1SZ-FE 1.3 - 2SZ-FE 1.4-4D - IND-TV, 2WZ-TV 1.5 - 1NZ-FXE 1.6 - 1ZR-FE 2.0D-4D - 1CD-FTV 2.2D-4D - 2AD-FHV, 2AD-FTV

Read more less

RRP £230 Engine Timing Kit BMW 1.8 / 2.0 N42/N46

Read more less

RRP £130.50   This set of tools enables the correct engine valve timing to be made.Suitable for use on engines as detailed below:- VAG – 2,4 / 3,2 FSI   See downloads for more application information.

Read more less

RRP £171.50   Set of self locking tools required for cam belt service Appilcations: Opel / Vauxhall ANtara 2.0D ('06-) Engine Codes: 2.0D - Z20DMH, Z20DM   See downloads for more information

Read more less

RRP £5.95 90215400 - Air Tool Oil 30ml Air tool oil - 30ml bottle It is essential to maintain your air tool with air tool oil, which will help reduce wear and tear and to help prevent rust and corrosion.

Read more less

EX DEMO UNITRRP £229 Signs of wear (see images)   3/8" drive2 component housingErgonomic handleQuick release chuck (0-10mm)Forward / reverse switchVariable speed trigger1800rpm

Read more less

EX DEMO UNIT RRP £199.95 Signs of wear, (see images)    1/2" chuck2 component housingSoft handleForward / reverse switch500rpmWeight: 1.75kgLength: 230mmAir Consumption: 200l/minAir Pressure: 6.2barSound Level: 80dBA

Read more less

RRP £29.50   Spare 1" Impact Head  

Read more less

RRP £346.00   This comprehensive set of over twenty tools enables the correct engine timing to be made when replacing the timing belt. Suitable for use on most popular cars with either petrol ordiesel engines see downloads for more details & applications.

Read more less

RRP £137.95   This kit is necessary for use on timing belt / engine timing applications. Typical vehicle/engine applications include :- Fiat 1,6 16v twin cam engine code 182 A4.000, 182 A6.000 and 182 B6.000 23113 Tensioning Tool includes the facility to interchange the connecting screw from M8 to M10 as introduced on models from (2000 on). It is recommended to liberally lubricate the tensioner assembly, prior to using the tool, as it can become seized.   See downloads for more information & applications.

Read more less

GO563 - Injector Extractor- Bosch M18 x 1.5 RRP £350.15 Complete tool for the removal of Bosch magnetic injectors. The half-shells of the tool head are positioned directly under the screw ring of the injector electrical connection. The locking sleeve with window provides a non-slip grip. Removal is carried out without partial disassembly and this ensures that the injector can be reused. Application: Universal for diesel engines of many manufacturers Technical data: Connection internal thread M18x1.5 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO439 - Double Cone Bearing Removal Kit RRP £561.35 For the quick removal of wheel hubs and bolted wheel bearings. Simple and efficient method to remove front wheel hubs quickly and without too much effort in terms of assembly. The new slide hammer version is filled with steel shot. This prevents the weight from bouncing back against the stop. The impact intensity is thus increased because the full impact force is transmitted to the component to be removed. Slide hammer technical data: Weight: 3Kg Total length: 580mm Connection - Thread: M18x1.5   Applications: Injectors Hubs Support joints Bodywork works Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO414 - Mechanical Injector Extractor Kit - Basic RRP £1068.01 The Govoni GO414 Basic Kit is a high quality mechanical injector removal system, specifically engineered to safely and effectively extract stubborn injectors without causing damage to the cylinder head. Key Features:  Heavy Duty Construction: Durable, professional grade components designed to withstand the high forces required to remove seized or corroded injectors. Universal Application: Compatible with a wide range of common rail diesel engines, including Bosch, Delphi, Denso, and Siemens injectors. Compact and Portable: Supplied in a robust carry case for easy transport and secure storage. Ideal for workshops looking for a reliable, cost effective injector removal solution, or mobile mechanics and technicians requiring a portable tool. Optional Upgrade: GO421 - Injector Adaptor Set - Bosch GO1012 - Hydraulic Cylinder Steel 12 Tonne Ensure smooth injector removal every time with the GO414 Basic Kit, a trusted tool for professionals. Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO382 - Ball Joint- Puller  - 39mm RRP £410.97 Tool for removing ball joints.Universal tool for removing tie rod head as well as supporting joints.The trapezoidal thread spindle is hardened and tempered as well as provided with a ball-bearing pressure piece.Impact wrenches can be used with the ball joint puller to complete the task more quickly. The most resistant conical seat connections can be released without any effort. Application:  Mercedes trucks e.g. DB 1424 and DB Actros 2.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

RRP £3491.70   For use with Govoni Spectrum (GO2100Pro or GO2100Pro-X) Combined with SPECTRUM pro and its dedicated functions and strategies, it makes diagnostics, cleaning and flow control of fuel injectors easy, fast and above all within everyone's reach.  Small size - allows the injector test bench to be positioned on a shelf and transportable  Safe both for the environment and for the operator himself, as the use of electricity is not directly required. Possibility to test up to 4 injectors simultaneously Suitable for any petrol injector  Compressed air supply with adjustable pressure from 0 to 5 bar (72.5PSI-500 Kpa) Sliding injector holder rail with quick coupling adjustable in height with taps to be able to open or close the passage of the liquid for each injector Graduated burettes for immediate reading of the injectors flow rate Quick connection burettes Integrated flushing liquid tank with filler cap with maximum capacity of 2000 c.c. (2 liters) Quick release air hose Test bench dimensions L=max454 x H=685 x D=300mm  The configuration consists of: test bench docking station cover Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

RRP £898.16   Diagnostic wiring, with the function of analyzing the vehicle's CAN network through the self-diagnosis connector with display of the values and outcome of the test. For use with GO2100PRO   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

RRP £639.94   Emulation wiring, with the glow plug test function with the measurement of the current absorption of the same and display of the tests.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

RRP £320.02 Emulation wiring, with the function of generating PWM waveforms with negative ground, for the emulation of sensors with digital output or the control of electronic low power actuators.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

RRP £256.06   Emulation / acquisition wiring, with the function of PWM power generator such as PWM POWER with an integrated 5V voltage generator; mass generator and feedback control. It is used for the activation of the components controlled in feedback through potentiometers.   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

38900400 - Engine Crane - Double Action Pump 1000KG RRP £874.47 Hydraulic Crane  Features Double action pump Chrome plated piston Overload safety valve Dead man controls

Read more less

38900200 - Engine Crane - Single Action Pump 1000Kg RRP £822.97 Hydraulic Crane  Features Single action pump Chrome plated piston Overload safety valve Dead man controls

Read more less

GO561 - Injector Removal Kit - Bosch Ducato Diesel Engine 3.0 RRP £205.95 Complete tool for the removal of Bosch Piezo injectors.  Removal is carried out with partial disassembly and this ensures that the injector can be reused.  Appliction: Fiat Ducato 3.0 L Diesel from 2006 Iveco Daily 2.3 L from 2011 to 2014 3.0 L Diesel from 2007 Citroen Jumper 3.0 L HDI from 2010 Peugeot Boxer 3.0 L HDI from 2010    Injectors: 0445116059 0445116019 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO564 - Installation/Removal Tool for Injector Nozzle- Mercedes RRP £144.15 To dismantle petrol injectors and to install the Teflon gasket For restoring fuel injectors immediately after the calibration of the sealing rings. Puller fork with hole for sliding handle (6 mm) and M8 female thread for slide hammer (not included) Applications: Models: S-Class S550, CL-Class CL550, S-Class Coupe/ Cabriolet S550, CLS-Class CLS550, SL-Class SL550 E-Class E550, M-Class GLE-Class GL450, GL-Class GLS-Class GL550, GLS550 S63 AMG, CL63 AMG. G CLS 63 AMG, ML 63 AMG GLE 63 AMG, GL 63 AMG GLS 63 AMG, E63 AMG, Infiniti Q50 (2.0t), Q60 (2.0t) & QX30 (2.0t) Engine: 4,6 - 5,5 L Mercedes benzina a iniezione diretta Engine code: M133, M152, M157, M270, M274, M276, M278 Injectors: 278 589 00 33 00 272 589 00 43 00 Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

RRP £144.15   For use with coil spring compressor workstations 3858 For Mercedes C Class (W205) 2015 onwards Front springs

Read more less

RRP £34.97 High-Performance Cooling System Test Cap Engineered for precision and durability, the 314 series cooling system caps are designed to provide a secure seal during pressure testing of heavy-duty vehicle cooling systems. Manufactured from high-quality materials to withstand workshop conditions, they ensure accurate and repeatable results when diagnosing leaks, checking radiator seals, or verifying system integrity. Each cap is purpose-built for specific vehicle applications, offering an exact fit to maintain system pressure and prevent coolant loss during testing. Compatible with the Sykes Pickavant 331400V2 XL - Cooling System Pressure Test Kit and associated pump assemblies, these caps integrate seamlessly into your existing diagnostic setup for professional-grade performance. Technical Specification Part Number: 33141500 Applications: MAN - E2000, F2000, L2000, TGA Internal Diameter: 52 mm Compatibility: Works with 331400V2 Kit and 33140100 Pump & Gauge Assembly Material: Heavy-duty composite with reinforced sealing surfaces Function: Provides an airtight seal for accurate pressure testing of cooling systems

Read more less

2 pc Low Profile Spanner Rack Set  Ideal for use in toolbox drawers Graduated teeth provide maximum wrench storage Holds up to 32 spanners securely, depending on how theyre organised Self-adhesive strip aids fitting Trims easily for a custom fit Fuel and solvent resistant 580mm length x 34mm max height

Read more less

GO903 - DSG Clutch Removal Kit VW Group RRP £616.97 The tool set for the disassembly and assembly of the DSG (Direct-Shift Gearbox) is designed to remove the clutch casing, including the discs, of 6-speed (code 08D) and 7-speed (code 0AM) VAG gearboxes, dual clutches (K1 and K2) and multiple shafts used in cars of the VAG Group from 2004 to 2012. Includes pliers to remove/install the main shaft safety ring. AUDI applicationModels: A3 SEAT applicationModels: Altea, Altea XL, Ibiza, Leon, ToldeoSKODA applicationModels: Fabia, Octavia, Roomster, Superb, YetiVW applicationModels: Golf, Golf Plus, Jetta, Passat, Polo, Scirocco, Touran   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO490 - Vibrofighter Universal Vibration Tool RRP £577.52 Supplementary set to remove injectors The tool acts directly through vibrations and impulses on the extraction tie rod installed on the injector It has been designed to fully remove the injector from its seat without damaging the cylinder head and without breaking the injector, which would leave residues inside the head Usable on almost all the injectors on the market (with and without hammer) Equipped with a small regulation valve with adjustable vibration intensity system according to the application Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO020 - Inner Bearing Replacement Kit RRP £957.80 Universal tool set for the replacement of inner bearings. Puller features a unique gripping principle that can also be used on flush bearing inner rings that remain on the wheel hub duringreplacement of the wheel bearing. When clamping with the clamping bell, the special cutting profile of the clamping sleeves penetrates even the smallest working gaps resulting from theproduction process, ensuring removal without slippage. The bearing ring is fully gripped and removed without tilting. Also works in places where the ABS pulse wheel is firmly attached to the wheel hub (e.g. VW Golf). Supplied with 5 grippers suitable for the removal of bearings with a diameter of 35 to 61mm Applications: VW, Audi, BMW, Ford, Fiat, Mercedes, Opel, Renault, Peugeot & Volvo. The kit includes the bushing for mounting the mechadraulic screw (GO1016).   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO019 - Wheel Bearing Set XXL Basic RRP £735.52 Set for the disassembly and assembly ø85 -99 mm wheel bearings and for the installation of the wheel hub directly on the vehicle or with the help of a workshop press. It is an addition to the GO015 wheel bearing kit and is designed to house the components of both sets. 3-Part Pressure Element - for an exact fit on the inner bearing  Applications: Ideal for wheel hubs and bearings on large vehicless. Can be used on silent blocks / bushings / sleeves etc.  Bearing Installation / Workshop Press Bearing installation - pressure on the bearing outer ring  Workbench or Directly on the Vehicle Hub installation - pressure on the bearing inner ring  Components: 7 x bearing pressure rings ø85.8 / ø87.5 / ø89.5 / ø91.5 / ø95.5 / ø97.5 / ø99mm 7 x bearing centring rings ø43 / ø44.5 / ø48.5 / ø49.5 / ø50.5 / ø53.5 / ø54.5 / ø57.5mm 2 x supports - ø95 / ø100mm 1 x centring device for supports - ø95 - ø100mm 1 x pressure ring for press 1 x guide for bearing 1 x M20 x 1.5 screw 300l 1 x nut + OR + bearing 1 x M20 x 1.5 50l nut   Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

GO010 - Universal Hub Puller and Drive Shaft Set - Basic RRP £595.13 For pressing out seized and bonded drive shafts and, with the optional Govoni slide hammer and adaptor set GO520 & GO521, for removing the wheel hub Considerable time savings - no damage to the thread - wheel bearing is not damaged Optimised hole pitch for maximum coverage of models within the market Suitable for 2, 3, 4, 5 and 6-hole bolt pitch on hubs with stud bolts and wheel bolts Contents:  1 x extractor with mounting thread 1-1/2"-16G 1 x reducing adapter ring for mechanical spindle,1-1/2"-16G x M22x2.0 1 x mechanical spindle, M22x2 1 x pulling flange, 96-142 mm for 3, 4, 5 and 6- hole bolt hub, for M12/M14 bolts 5 x conical washers 1 x solid lubricant paste Full range of Govoni available - click to see the  Govoni Catalogue 2025 or Govoni Garage Equipment Catalogue 2025

Read more less

RRP £10.29   Pack of 2 StealthMounts Battery Mounts Compatible with Makita 40v XGT cordless batteries. Keep your batteries organised and right where you need them. Made from strong injection moulded ABS plastic with holes for mounting. Batteries 'click' into place and can be held at any angle. Can be mounted at varying distance from one another and in very small spaces for maximum workshop efficiency.

Read more less