Fuel Injection

21 products

  • 314925V2 VW Group Fuel Pump Pressure Test Kit for PD (Diesel) & FSi Engines

    314925V2 VW Group Fuel Pump Pressure Test Kit for PD (Diesel) & FSi Engines

    UPDATED KIT - Now includes 90 degree elbow to overcome access issues on certain models A specially designed Fuel Pressure Tester for the PD & FSi ranges of engines as used by VW Group 20bar Pressure Gauge “ as both PD and FSi fuel pumps operate at higher pressures than normal fuel pumps Extra long hose assembly for ease of access “ 600mm Includes special PD fuel pump quick connector (Diesel) and 2 x special FSi fuel pump connectors for 1.6, 1.8, 2.0 FSi engines with Bosch fuel pumpsSpare Parts: 31490170 - 20bar Pressure Gauge c/w 600mm hose assembly 31481470 - M12 male adaptor for PD fuel pump 31481870 - FSi adaptor (female) 31487870 - FSi adaptor (male) 31484670 - M12 x 1.5 Banjo Bolt Assembly

  • 31469000 Premier Low Pressure Fuel Test Kit

    31469000 Premier Low Pressure Fuel Test Kit

    A comprehensive high quality OEM standard low pressure diesel and petrol pressure kitIncludes:- Shock protected, fuel resistant dual scale gauge - to 10 bar / 145psi- Relief valve for safe de-pressurisation- Vacuum gauge assembly- Fuel tap and T-connector assembly- Quick-coupling adaptors and connectors with reinforced hoses and brass fittings- 4 x Schrader valve connectors Latest fittings for Jaguar Land Rover variant engines Supplied with easy to follow fitting / application instructions Applications include:Alfa, Audi, BMW, Chrysler, Citroen, Ferrari, Fiat, Ford, GM, Jaguar, Land Rover, Mercedes, Mini, Peugeot, Renault, VW and Volvo

  • 314875V2 Fuel Injection Pressure Test Kit for Petrol Engine Vehicles

    314875V2 Fuel Injection Pressure Test Kit for Petrol Engine Vehicles

    Updated kit now covers Alfa Romo, Fiat, Lancia and new Ford Ka vehicles Universal Injection Pressure Test Kit for modern Electronic, Multi-point injection systems Shock protected, fuel resistant dual scale gauge “ to 10bar / 145psi Relief valve for safe depressurisation Quick coupling adaptors and connectors Wide applications range:S type, 8mm plastic push-in fittings, as used on Alfa, Audi, Citroën, Fiat, Ford, GM, Peugeot, VW etcSchrader type valve test port adaptors (7/16 & 8mm) as used on Alfa, BMW,Chrysler, Ferrari, Fiat, Ford, GM, Mercedes, Mini, Volvo etcSpecialist Renault fittings for use on Renault 1.2 / 1.4 / 1.6 Petrol Engines - Clio, Twingo, Kangoo, Extra, Megane, Scenic etcSupplied in plastic case with foam insertOptional fittings available to suit older vehiclesSpare Parts: 31487100 - Multi-Point Fuel Pressure Test Gauge Assembly (10bar / 145psi) 31488500 - Quick Connector Set 31487370 - T-Connector & Tap Assembly 31486370 - Double-ended QR Hose Assembly 31481870 - 7/16 Schrader valve connector 31481970 - 8mm Schrader valve connector 31485770 - M8 right angled Schrader valve connector

  • 31489500 - Fuel Injection Pressure Test Kit for Schrader Test Ports

    31489500 - Fuel Injection Pressure Test Kit for Schrader Test Ports

    Fuel Pressure test kit containing three Schrader Test Port adaptors and flexible hose for ease of access Schrader test ports are the preferred method of measuring fuel pressure on vehicles with fuel rails. Quicker and easier than breaking into fuel lines Applications: 8mm Schrader valve connector - as fitted on some BMW, Ford, Mini, PSA, VAG and Volvo models 7/16 Schrader valve connector - as fitted on some Chrysler, Mercedes, Vauxhall and Opel models M8 Quick release Schrader valve connector - as fitted to Alfa Romeo, Fiat and new Ford Ka Supplied in cardboard carton Spare Parts: 31487100 - Multi-Point Fuel Pressure Test Gauge Assembly (10bar / 145psi) 31486370 - Double-ended QR Hose Assembly 31481870 - 7/16 Schrader valve connector 31481970 - 8mm Schrader valve connector 31485770 - M8 right angled Schrader valve connector

  • MV5567 Mityvac Fuel Injection Cleaner System

    MV5567 Mityvac Fuel Injection Cleaner System

    Quickly and cleanly removes and prevents deposits on fuel injectors as well as loosening and dissolving carbon build-up in the air induction system, including the throttle plate, intake manifold and valves Enhances engine performance, improves fuel economy, reducesmaintenance and improves emissions Adjustable inlet pressure regulator for use on low and high pressure fuelsystems Pressure gauge (0-150 PSi) (0-10 bar) Contents:- Fuel Injection Cleaner Assembly with pressure regulator, gauge, valves, fittings and 950ml canister- 1.2m long connection hose- 16 fuel injection system connectors- Wall Mount Bracket- User ManualSpare Parts: MV5567-01 - Canister MV5567-02 - Pick-up Tube & Filter Assy MV5567-03 - Hook & Chain Assy MV5567-04 - Air Inlet & Valve Assy MV5567-05 - Pressure Regulator MV5567-06 - Replacement Gasket MV5567-07 - Relief Valve MV5567-08 - Pressure Gauge MV5567-09 - Outlet Valve Assy MV5567-10 - Wall Mount Bracket MV5567-11 - Connection HoseAdaptors available individually on request

  • MV8550 - Mityvac Silverline Elite Automotive Kit

    MV8550 - Mityvac Silverline Elite Automotive Kit

    Ideal for a wide variety of workshop tasks requiring vacuumand / or pressure featuring a dual convertor to switch from vacuum to pressure Ideal for a wide variety of diagnostic tests which require a pressure source- e.g. EVAP sensors, Cooling system leak tests etc Ideal for a wide variety of workshop tasks requiring vacuum and / or pressure- e.g. Diagnostics, brake bleeding, fluid transfer, evacuation, sampling etc Contents:- Silverline Die-Cast Aluminium Vacuum & Pressure Pump to 4bar (60psi) pressure- Large 480ml Fluid Reservoir with quick connection to pump- Selection of 12 vacuum caps- Diagnostic / Brake Bleeding Adaptor kit- Tubing and Tube ConnectorsSpare Parts: MV8550-01 - Vacuum/Pressure Manometer MV8550-02 - 2 x Tubes (600mm) MV8550-03 - Reservoir Kit MV8550-04 - Tube Connectors MV8550-05 - Vacuum Caps MV8550-06 - Brake Bleeding Adaptors MV8550-07 - Test Adaptors Kit MV8550-08 - Repair Kit MV8550-09 - Vacuum/Pressure Pump MV8550-10 - Fluid Reservoir Kit MV8550-11 - Filter Priming Adaptors Kit

  • MV8000 - Selectline Automotive Tune-Up & Brake Bleeding Kit

    MV8000 - Selectline Automotive Tune-Up & Brake Bleeding Kit

    Ideal for brake bleeding and basic diagnostic checks requiring vacuum Lightweight, non-corrosive and chemical resistant pump Kit contents: - Selectline PVC Hand Vacuum Pump - 135ml Fluid Reservoir with transfer lid - Selection of breed screw adaptors & manifold plugs - Tubing & Tube Connectors

  • MV7201 Mityvac Fluid Evacuator Plus

    MV7201 Mityvac Fluid Evacuator Plus

    For fluid evacuating AND dispensingChanges from evacuation to dispensing at the press of a button9ltr capacity reservoir with stabilizer baseAutomatic shut-off prevents accidental over-fillingManual pump for mobility “ no air or electric supply requiredSupplied with evacuation dipstick tubes and adaptors:- 1.5mtr x 5.7mm diameter / 1.5mtr x 6.6mm diameter / 1.5mtr x 10mm diameterSpecial features:- New improved gasket design ensures airtight seal for vacuum / pressure- Self-locking retaining nuts ensure the lid remains securely clamped and will not loosen allowing pressure / vacuum leaks- Overflow shut-off valve with threaded connection so it remains securely in placeIdeal for use dispensing and extracting:- Engine Oil / Transmission Fluid / Gear Oil- Brake Fluid / Power Steering Fluid / Coolant

  • MV7300 Mityvac Pneumatic Fluid Evacuator

    MV7300 Mityvac Pneumatic Fluid Evacuator

    Works effectively with 31467500 and 31467000 kits for vehicles that need to have diesel drawn back up to the engine from the fuel tank after service work Operates on compressed air to create a powerful vacuum for bleeding the most difficult of vehicles 9ltr capacity reservoir to ensure all the air is removed from the fuel suction system Includes an adaptor to connect to bleed kit Automatic shut-off prevents accidental over-filling Compressed air connection on base for stability, with independent air shut-off valve Special features: Improved gasket design ensures air tight seal for vacuum / pressure Self-locking retaining nuts ensure the lid remains securely clamped to prevent pressure / vacuum leaks Overflow shut-off valve with threaded connection Supplied with evacuation dipstick tubes and adaptors Can also be used for extracting: Engine Oil / Transmission Fluid / Gear Oil / Brake Fluid / Power Steering Fluid and Coolant

  • MV8010 mityvac selectline hand pump
  • MV8510 mityvac silverline hand pump

    MV8510 mityvac silverline hand pump

    Pressure Hand Pump to 4bar Pump with gauge only

  • 51502700 - Diesel Filter Filler / Bleeder

    51502700 - Diesel Filter Filler / Bleeder

    For quick, clean and problem free bleeding of the diesel Filter (filling of the diesel filter) For bleeding the low pressure side from the tank to the filter  Three flexible rubber pipes for connecting to 5 - 12mm male fuel pipe fittings Common applications include; VW, Seat, Skoda, Audi, Mercedes CDI, Peugeot HDI, Renault, Fiat, etc. 

  • 31485300 Comprehensive Schrader Valve Test Set

    31485300 Comprehensive Schrader Valve Test Set

    Set of schrader type fuel port test adaptors which can be used with the fuel pressure gauge supplied in the Diesel Fuel System Bleeding Kit - Master Kit - 31467000 Can be used to bleed air from the Schrader valve test port on specific vehicles - e.g. Saab Schrader test ports are the preferred method of measuring fuel pressure on vehicles with fuel rails Quicker and easier than breaking into fuel lines Applications include: Alfa Romeo, BMW, Fiat, Ford, Jaguar, Land Rover, Mercedes, Mini, Saab, Vauxhall and Volvo

  • 31487370 T Connector Assembly

    31487370 T Connector Assembly

    T connector & tap assembly for fuel injection pressure test kits

  • 31486370 Double-Ended QR Hose Assembly

    31486370 Double-Ended QR Hose Assembly

    Double-Ended QR Hose Assembly for 3148 range of Fuel Injection Pressure Test Kits

  • 31466100 Adaptor - M16 x 1mm - Bosch CP4

    31466100 Adaptor - M16 x 1mm - Bosch CP4

    Adaptor - M16 x 1mm - Bosch CP4 for 314650V2 - Common Rail Diesel (CRD) High Pressure Test Kit - UPDATED KIT

  • MVA550 mityvac air induction decarb nozzle

    MVA550 mityvac air induction decarb nozzle

    Available as an optional extra for MV5567 Extends the applications of the Mityvac Fuel Injection Cleaner to include airinduction cleaning. The MVA550 connects to the Cleaner and sprays a finemist of decarbonising solution into the air induction system or onto a targeted area such as the throttle plateFeatures Snapin, pushbutton release style connection to Cleaner hose Durable nickelplated brass components Highquality leakproof design

  • 31489000 renault t-connectors (10-12mm)

    31489000 renault t-connectors (10-12mm)

    Fuel Injection Special Adaptors (x2)Renault Plastic T-Connectors (10 / 12mm)Included in standard MPI kits but available separately as an add-on for owners of older kits. (Petrol Applications)

  • 31488500 specialist adaptors (x2) - fiat / GM quick-connect

    31488500 specialist adaptors (x2) - fiat / GM quick-connect

    Fuel Injection Special Adaptors (x2)Fiat / GM Quick-ConnectIncluded in standard MPI kits but available separately as an add-on for owners of older kits. (Petrol & Diesel Applications)

  • 31487100 10 Bar Gauge Assembly

    31487100 10 Bar Gauge Assembly

    10 Bar Gauge Assembly for 3148 range of Fuel Injection Pressure Testers

  • 31467600 Adaptor - M16 x 1mm - Bosch CP4

    31467600 Adaptor - M16 x 1mm - Bosch CP4

    Connects to 3/8 drive air ratchet to replace the hand pump section in 31467500 - Diesel Fuel System Bleeding kit to generate faster flow Easily engages with all 3/8 Dr. air ratchets Retaining bracket holds pump during use for one-hand operation Supplied in plastic case

Fuel Injection

Login

Forgot your password?

Don't have an account yet?
Create account