Clearance

Spare pipette for refractometer for 03201000 refractometer

Read more less

Fortron Oil Fortifier has been tested in a wide variety of high mileage engines. This has proven the reliability of the product in restoring performance and greatly extending the life of engines far beyond the stage where they would have required extensive repairs or a complete overhaul. Oil Fortifier is recommended for use in engines of older or higher mileage vehicles which are showing signs of wear; evidenced by high oil consumption or excessive exhaust smoking. Oil Fortifier is compatible with all crankcase fill oils, including fully synthetic, which meet the specification of API and ACEA classifications. Reduces oil consumption in engines showing signs of wear Minimises exhaust smoking by providing better piston ring sealing Restores performance to tired engines Improves oil pressure to better protect moving parts Please note: this Product has an MOQ/Pack size of 30 See downloads for safety data sheet.

Read more less

A diesel fuel tank treatment, formulated to assist in cleaning and maintaining the cleanliness of the turbine and turbine housing in Diesel Turbo Chargers. When used as a regular treatment, Diesel Turbo Cleaner will remove soot and ash deposits that can build up in the turbine housing and on the turbine itself. Continued,regular use can prevent further deposition, preventing potential wear and allowing the turbo to operate more efficiently. Benefits: Aids the removal of deposits in the turbine housing Helps prevent the deposition of soot & ash in the turbo Assists the removal of ash build up on intake valves & injectors Helps cold starting Suitable for all types of diesel fuel. Please note: this Product has an MOQ/Pack size of 30 See downloads for safety data sheet.

Read more less

Deep Socket  1/4" SD  11mm  

Read more less

Deep Socket  1/4" SD  12mm Bihex  

Read more less

Air tool oil - 30ml bottle It is essential to maintain your air tool with air tool oil, which will help reduce wear and tear and to help prevent rust and corrosion.

Read more less

A cost effective solution to restore fogged or hazy headlights. Removes yellowing and provides a professional result in under thirty minutes. Rejeuvenate hazy or fogged headlights in three simple steps and make a noticeable improvement to vehicle night vision. Benefits Professional results in 15 minutes Up to 100% brighter with less glare Removes haze and yellowing from headlights Provides safer night time driving High quality and cost effective Cleans both headlights Restores headlights UV protective formula   Please note: this Product has an MOQ/Pack size of 10 See downloads for safety data sheet.

Read more less

2 pc Low Profile Spanner Rack Set  Ideal for use in toolbox drawers Graduated teeth provide maximum wrench storage Holds up to 32 spanners securely, depending on how theyre organised Self-adhesive strip aids fitting Trims easily for a custom fit Fuel and solvent resistant 580mm length x 34mm max height

Read more less

Medical face guards x 100    

Read more less

Injector Socket M16 Bosch & Delphi

Read more less

Injector Socket M20 Denso

Read more less

Injector Socket M25 Siemens

Read more less

Injector Socket M17 Bosch & Delphi

Read more less

Replacement Injector strip down tool For use with 185800V2 Hydraulic injector puller

Read more less

2 pack of StealthMounts Battery Mounts for Milwaukee M18 cordless batteries. Keep your spare batteries organised and right where you need them. Made from strong injection moulded ABS plastic with holes for mounting. Batteries 'click' into place and can be held at any angle. Can be mounted at varying distance from one another and in very small spaces for maximum workshop efficiency.

Read more less

Pack of 2 StealthMounts Battery Mounts Compatible with Dewalt 10.8v & 12v cordless batteries. Keep your spare batteries organised and right where you need them. Made from strong injection moulded ABS plastic with holes for mounting. Batteries 'click' into place and can be held at any angle. Can be mounted at varying distance from one another and in very small spaces for maximum workshop efficiency.

Read more less

Pair of StealthMounts Battery Mounts Compatible with Makita 18v LXT cordless batteries. Keep your spare batteries organised and right where you need them. Made from strong injection moulded ABS plastic with holes for mounting. Batteries 'click' into place and can be held at any angle. Can be mounted at varying distance from one another and in very small spaces for maximum workshop efficiency.

Read more less

Pack of 2 StealthMounts Battery Mounts Compatible with Makita 10.8v & 12v CXT Batteries Keep your spare batteries organised and right where you need them. Made from strong injection moulded ABS plastic with holes for mounting. Batteries 'click' into place and can be held at any angle. Can be mounted at varying distance from one another and in very small spaces for maximum workshop efficiency.

Read more less

Pack of 2 StealthMounts Battery Mounts Compatible with Stanley Fat Max, Black & Decker & Porter Cable 18v cordless batteries. Keep your spare batteries organised and right where you need them. Made from strong injection moulded ABS plastic with holes for mounting. Batteries 'click' into place and can be held at any angle. Can be mounted at varying distance from one another and in very small spaces for maximum workshop efficiency.

Read more less

Pair of StealthMounts Battery Mounts Compatible with Bosch ProCORE & Professional cordless batteries. Keep your spare batteries organised and right where you need them. Made from strong injection moulded ABS plastic with holes for mounting. Batteries 'click' into place and can be held at any angle. Can be mounted at varying distance from one another and in very small spaces for maximum workshop efficiency.

Read more less

Pack of 2 StealthMounts Battery MountsCompatible with Makita 40v XGT cordless batteries.Keep your batteries organised and right where you need them.Made from strong injection moulded ABS plastic with holes for mounting.Batteries 'click' into place and can be held at any angle.Can be mounted at varying distance from one another and in very small spaces for maximum workshop efficiency.

Read more less

CryoCobalt Drills are specially designed for drilling very hard metalsIdeal for drilling high strength alloy steels, ultra high strength boron steels,as well as aluminium chassis, panels and rivetsAdded Cobalt increases micro-sharpness and operating temperaturesCryophase process improves flexibility and extends bit operating lifeCryoCobalt drills can be re-sharpened Length: 105mmDiameter: 6.5mm Material: CM-88 Chrome Moly Cobalt High Heat SteelHeat Resistance: Up to 1200°F / 650°CHardness: 66-68ReTip Design: 135° Split PointCoating: Gold OxideCryophase: Patented thermal cycling cryogenic treatment

Read more less

Cars that are fitted with a Diesel Particulate Filter and regularly do urban driving, will over time suffer from an increasingly blocked filter. As part of a service we recommend a DPF cleaner. Formulated for preventative maintenance and to solve DPF issues, the service kit allows a rapid and complete clean of the filter. Key Benefits Helps improve fuel economy Improves engine performance and response Restores lost power Reduces exhaust emissions Aids passive regeneration of the Diesel Particulate Filter Used as preventative or problem solving treatment   Please note: this Product has an MOQ/Pack size of 12 See downloads for safety data sheet.

Read more less

CryoCobalt Drills are specially designed for drilling very hard metalsIdeal for drilling high strength alloy steels, ultra high strength boron steels,as well as aluminium chassis, panels and rivetsAdded Cobalt increases micro-sharpness and operating temperaturesCryophase process improves flexibility and extends bit operating lifeCryoCobalt drills can be re-sharpened Length: 115mmDiameter: 8mm Material: CM-88 Chrome Moly Cobalt High Heat SteelHeat Resistance: Up to 1200°F / 650°CHardness: 66-68ReTip Design: 135° Split PointCoating: Gold OxideCryophase: Patented thermal cycling cryogenic treatment

Read more less

Injector Socket M27 Siemens

Read more less

EX DEMO UNIT     SCHAEFFLER APPROVED Suitable for most 1.9 & 2l TDi VAG applications Suitable for M8 Fine & M8 to M10 coarse stepped studs For use on the steel timing belt tensioner mounting stud which screws into the aluminium cylinder head‹ The mounting studs are prone to seizing due to steel to aluminium corrosion bond which can occur between the stud and cylinder head due to oxidisation. When this occurs, the stud proves difficult to remove without the correct tool  When replacing the stud it must be torqued to the manufacturers recommended value, failure to do so can result in the stud working loose and releasing the timing belt tensioner or vibrating with the cyclic stress and snapping off. Either of these eventualities can lead to catastrophic engine damage

Read more less

Not just another hand cleaner A solvent free, hand cleaner with fine walnut shell specially formulated to gently remove stubborn materials such as grease, paint, printing inks, glue etc. A solvent free, very low environmental impact hand cleanser specially formulated to gently remove stubborn non dried materials such as grease, paint, printing inks, glue etc. A soft paste consistency containing sustainable walnut shell with natural minerals which allows for an easy massage into the skin and rinses away to leave a lightpleasant perfume. Ideal when regular cleaning of hands is essential. Easy rinsing Plastic bead free, low environmental impact Effective and suitable for the heaviest soiling Pleasant residual smell on hands after washing Gentle massaging action of walnut shell helps remove soiling Contains emollients, leaves a very soft feel to the skin Dispensers available to reduce the risk of cross infection   See downloads for safety data sheet.

Read more less

Designed to assist in the fitting of new style alternator / air-con / power steering drivebelts, which have no load adjustment mechanism, and are designed to be “stretched” intoplace. Guides the belt into the correct position, whilst turning the crankshaft pulley by hand Steel guide pins help lock the tool in situ, whilst the alloy body guides the belt over theedge of the pulley, and supports the load on the belt during the fitting process

Read more less

Spare 1" Impact Head  

Read more less

Double ended door hing pin remover, specially designed for use on solid pins found on Ford Fiesta, Escort and Orion models. Manucfactured from high strength carbon steel Designed for access where space is limited 16mm square bar, double ended, with 7.5mm jaws   Length: 270mm Width: 16mm Jaw: 7.5mm

Read more less

These tools are necessary for use when servicing the engine and replacing the timing belt. Typical vehicle/engine applications include Fiat 1,4 12v engines used on Fiat Brava, Bravo and Lancia Ypsilon eng. codes 182 A3.000, 182 A5.000 (95-00)     See downloads for more information & applications.

Read more less

Diesel Injector Puller For use with Lucas & Bosch type clamp-down injectors Slide hammer mechanism c/w M8, M12 & M14 adaptors Universal tool with a wide variety of Car, LCV & HGV applicationsSpare Parts: 08570370 - Adaptor M12 / M14 08570470 - Adaptor M8

Read more less

TDC Setting Wrench

Read more less

Designed to clean the sealing surface of the injector Aluminium body with 19mm flat steel cutter which is rotated over the injector nozzleto clean the nozzle seat surface Aluminium body with knurled grip, and 3/8 sq dr for ease of use 19mm Flat Cutter

Read more less

Piston Windback tool RH Screw & Body

Read more less

A special kit containing the necessary special pins required to lock the camshaft sprocket,flywheel and align the crankshaft and fuel pump when checking the valve timing on 2.0 and 2.4 litre chain driven engines and or replacing the timing belt on 1.4 /1.6 litre engines.   See downloads for more application information.

Read more less

Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models Extra long, thin design for easier working in confined spaces Length: 650mm

Read more less

Removal and installation of the timing chain assembly requires the use of 07763800 kit and the appropriate timing tools from the associated engine setting / locking tool kits listed in the application chart.The service tools in this set are required when replacing the timing chain and other applications which involve the removal of the chain assembly on the models / engines detailed below:   See downloads for more information & applications

Read more less

This kit is necessary for use on timing belt / engine timing applications. 23110-D Camshaft Setting Tools for Fiat Barchetta & Coupe models (96-) and 23110-E for Fiat Brava, Bravo and Marea models (95-) 23111-06 Flywheel Locking Tool is also suitable for 1,9D and 2,4D Turboengines.   See downloads for more information & applications.

Read more less

Adjustable torque screwdriver with 1/4" shaft for use with 1/4" drive accessories supplied with 5mm hex key for torque adjustment Includes 3/8" square drive in handle for easier application of torque Scale graduated in 0.5Nm increments Precise tool for critical torque setting on most TPMS / Valve Nuts Also ideal for fitting of other automotive components where precise torque is recommended e.g. sensors, plastic trim, dashboard components & glow plugs

Read more less

        Part OEM Description   SP23223 1 871 000 200 KM 661 C Crankshaft Pulley Flange Holding Tool ( + bolts )   SP23222 1 870 900 400 303-1468 Timing Chain Tensioning Tool   SP23221 1 870 900 300 303-1468 Crankshaft Timing Tool  

Read more less

Easy fitting and mounting of wheels Especially dedicated for cars with short axle tie with free turning brake disc without centering screw Bolts are placed into the wheel bolt holes Very quick mounting without any thread For wheel bolts M12 and M14 Advantages:  1.   Free mounting of the wheel locking boltsThe full weight is resting on the centering bolts which allows for 2.  No risk of heavy wheels falling; decreasing the likelihood of injury to the operator Contents: 1 x Fit up bolt M12 x 127.5 mm1 x Fit up bolt M14 x 127.5 mm2 x Replacement sleeve M12 x 27.8 mm2 x Replacement sleeve M14 x 27.8 mm1 x support

Read more less

Camshaft Sprocket Locking Tool  

Read more less

VW V6 Locking Tool - Petrol Engines   See downloads for instructions and application information

Read more less

Engine Timing Tool Set - Citroën/Peugeot.This comprehensive set of tools enables the correct engine timing to be made when replacing the timing belt.Suitable for use on most popular cars with 16v petrol engines as detailed below:- Supplied in a metal storage case with a “Tool-Control System” providing security, ease of selection and the comfort of knowing that all the tools have been returned to the box ready for the next job.   See downloads for more application information.

Read more less

This set of tools enables the correct engine valve timing to be made.Suitable for use on engines as detailed below:- VAG – 2,4 / 3,2 FSI   See downloads for more application information.

Read more less

Diesel Engine Timing Tool Set   This kit is necessary for use when servicing the engine valve timing and replacing the timing belt on many popular vehicle applications. See downloads for more application information.

Read more less