Rams & Cylinders (Hydraulic & Mechadraulic)

New design includes pre-loading 30mm hex, 2” extension and foam cut out for storage. Standard power unit for SP hydraulic pulling options and can also be used with many alternative SP puller applications e.g. 3 leg pullers, ball joint pullers, hub pullers, suspension bush removers etc Diameter 1 1/2" Thread 16tpi Whitworth Grease filled. Direct force improves stability under load. Provides maximum withdrawal force of 80kN. New hex head makes it possible to increase pre-load capability up to 4 tonnes (with the use of a 30mm wrench). When hydraulic power is applied, the full force is achieved with little loss of ram travel. As the workpiece starts to release, more stroke and power can be applied to ensure a good safe removal.  

Read more less

Includes pre-loading 30mm hex, 2” extension and foam cut out for storage Standard power unit for SP hydraulic pulling options and can also be used with many alternative SP puller applications e.g. 3 leg pullers, ball joint pullers, hub pullers, suspension bush removers etc. 1 1/2” thread Grease filled Direct force improves stability under load Provides maximum withdrawal force of 80kN New hex head makes it possible to increase pre-load capability up to 4 tonnes (with the use of a 30mm wrench) When hydraulic power is applied, the full force is achieved with little loss of ram travel As the work-piece starts to release, more stroke and power can be applied to ensure a good safe removal  Includes 5 Hydraulic Rams and Desktop Merchandiser

Read more less

NEW DESIGN UPGRADE - NOW INCLUDES PRE-LOADING 30MM HEXIncludes: 2” extension and foam cut-out for storage Standard power unit for SP suspension products and is 50% more powerful than the original SP1500 Series 8 tonne ram, creating reliable power for tough applications Can achieve up to 4 tonnes of mechanical force prior to hydraulic operation Diameter 1 1/2" Thread 16tpi Whitworth N.B. Due to the thread being the same as the 1500 series ram it can be used with our hydraulic puller range but all of the components in that range are rated at 10T and so if you chose to use this ram it is at your own risk and Sykes Pickavant cannot be held responsible for any accidents or component damage

Read more less

20T Hydraulic Cylinder Steel cylinder, single acting plunger with spring return Pistons hard chromed Ram inside roll polished Heavy duty spring for fast and full return Stop rings for piston blow-out protection Rod wiper protects inner cylinder from dirt contamination Specifications Max Working Pressure: 700 Bar Oil Capacity: 610cc Diameter: 88mm Stroke: 158.5mm Operating Range: 273-431.5mm  

Read more less

30T Hydraulic Cylinder Aluminium cylinder, single acting hollow plunger with spring return Large bearing surfaces for side load protection Heavy duty spring for fast and full return Hard anodize coating reduces wear and corrosion Stop rings for piston blow-out protection Rod wiper protects inner cylinder from dirt contamination Lightweight aluminium construction Supplied with three steel inserts (solid, hollow plain and hollow threaded) Specifications Max Working Pressure: 700 Bar Oil Capacity: 310cc DIameter: 117mm Stroke: 65mm Operating Range: 178.5-243.5mm

Read more less

50T Hydraulic Cylinder Aluminium cylinder, single acting hollow plunger with spring return Large bearing surfaces for side load protection Heavy duty spring for fast and full return Lightweight aluminium construction Stop rings for piston blow-out protection Rod wiper protects inner cylinder from dirt contamination Supplied with three steel inserts (solid, hollow plain and hollow threaded) Hard anodize coating reduces wear and corrosion Convenient carry handle Specifications Max Working Pressure: 700 Bar Oil Capacity: 368cc Diameter: 160mm Stroke: 50mm Operating Range: 212-262mm  

Read more less

Allows application of up to 12 tons of mechadraulic force which can be used to provide a controlled force in place of the mechanical effort required when using the GO410 / GO426 Technical data: Dimensions:  80 x 55 mm Stroke:  8 mm Driving torque:  67Nm Weight:  2.5 Kg Hole:  21.5 mm 

Read more less

Technical data Force: 12ton Stroke: 8 mm. Dimensions: 80x55 mm Pressure: max. 700 Bar Hole: 21.5 mm Connection: 3/8" -18 NPT Material: steel

Read more less

Thanks to the use of aluminium, the cylinder combines the strength of steel with the light weight of this element. Non-slip grip on the handle. There are 4 bores on the body for fastening the cylinder. Applications include: injector removal; introduction of wheel hubs; general use in the loosening of very tight mechanical components. Technical data Force: 12tons Stroke: 8 mm Body dimensions: 98x80x50(h) mm Pressure: max. 700 Bar Hole: Ø 21,5 mm Driving torque: 56Nm Weight: 1,65 Kg Grease temperature range of use: from -25°C to 80°C Material: aluminium Adaptors: M10/M12/M14/M16/M18

Read more less

Force: 17tonnes Stroke: 43 mm Dimensions: 90x155 mm Pressure: max. 700 Bar Hole: 20 mm Connection: 3/8" -18 NPT Outside connection thread: 2" 3/4-16 UN Material: steel

Read more less

Allows application of up to 20 tons of hydraulic force which can be used to provide a controlled force in place of the mechanical effort required when using the GO410 / GO426 Technical data: Dimensions:  100 x 60 Stroke:  8 mm Pressure:  700 Bar Weight:  3,04 Kg Hole:    33 Coupling connection thread 3/8" -18 NPT

Read more less

Provides up to 32 tons of controlled hydraulic force Dimensions: 104 x 261 mm Stroke: 50 mm Pressure: max. 700 Bar Hole: 21.5 mm Connection: 3/8" -18 NPT Inner thread: M24 x 2 Outside connection thread: 2" 3/4-16 UN

Read more less

The mechanical properties, the shape and dimension for which they were designed, ensure that Govoni hydraulic cylinders have a field of use to the automotive industry as: Injector disassembly Bearing, hub and silent block disassembly Coaxial unlocking of very tight mechanical components. Equipped with 5 threaded adaptors in order to fit the most relevant threaded bars on the market. Specifications Force: 12 Tonnes Stroke: 8 mm Dimensions: 80x50 mm Pressure: Max. 700 Bar Hole: 21.5 mm Connection: 3/8"-18 NPT Material: Aluminium Adaptors: M10/M12/M14/M16/M18

Read more less

The mechanical properties, the shape and dimensioning for which they were designed, ensure that Govoni hydraulic cylinders have a field of use to the automotive industry as: Injector disassembly; Bearing, hub and silent block disassembly; Coaxial unlocking of very tight mechanical components. Equipped with 5 threaded bushes in order to fit the most relevant threaded bars on the market. Specifications Provides up to 12 tons of controlled hydraulic force Dimensions: 90 x 155 mm Stroke: 43 mm Pressure: max. 700 Bar Hole: 20 mm Connection: 3/" -18 NPT Mounting Thread: 2 3/4-16 UN Adaptors: M10/M12/M14/M16/M18

Read more less

The mechanical properties, the shape and dimensioning for which they were designed, ensure that Govoni hydraulic cylinders have a field of use to the automotive industry as: Injector disassembly; Bearing, hub and silent block disassembly; Coaxial unlocking of very tight mechanical components. Equipped with 5 threaded bushes in order to fit the most relevant threaded bars on the market. Specifications Provides up to 12 tons of controlled hydraulic force Dimensions: 90 x 155 mm Stroke: 43 mm Pressure: max. 700 Bar Hole: 20 mm Connection: 3/" -18 NPT Mounting Thread: 2 3/4-16 UN Adaptors: M10/M12/M14/M16/M18

Read more less

The mechanical properties, the shape and dimensioning for which they were designed, ensure that Govoni hydraulic cylinders have a field of use to the automotive industry as: Injector disassembly; Bearing, hub and silent block disassembly; Coaxial unlocking of very tight mechanical components. Equipped with 5 threaded bushes in order to fit the most relevant threaded bars on the market. Specifications Provides up to 32 tons of controlled hydraulic force Dimensions: 104 x 261 mm Stroke: 50 mm Pressure: max. 700 Bar Hole: 21.5 mm Connection: 3/8" -18 NPT Inner thread: M24 x 2 Outside connection thread: 2 3/4-16 UN

Read more less